With technology and quality, our company is confident and has also gained recognition from a large number of customers. This is our company's reputation, which makes it unbeatable in the industryAnti-corrosion thermistorIt is the most commonly used temperature detector in the medium and low temperature zone. Its main features are high measurement accuracy and stable performance. It is not only widely used in industrial temperature measurement, but also made into a standard reference instrument.
The anti-corrosion thermal resistor adopts a multi-layer anti-corrosion structure (the anti-corrosion layer of the anti-corrosion thermal resistor is usually a thick walled 316L or 304L steel pipe with an integral sintered polytetrafluoroethylene layer and wear-resistant anti-corrosion layer), and the anti-corrosion effect and service life have been verified by many domestic enterprises through long-term use.
The PTFE anti-corrosion coating for the anti-corrosion thermistor is sintered using the domestic integral sintering process, which solves the problem of joint leakage that cannot be avoided by other manufacturing processes. The application of this technology has enabled our company's anti-corrosion thermal resistors and other anti-corrosion products to have an average service life of over one year (in an environment without significant wear and tear). At the site of use, there is often severe erosion of the anti-corrosion layer of the thermal resistor by high flow rate measured medium particles. Our company's anti-corrosion thermal resistor has a layer of wear-resistant material outside the anti-corrosion layer, which can effectively extend the service life of the anti-corrosion layer by 8-10 times in environments with erosion, unlike other similar anti-corrosion thermal resistors in China.
All anti-corrosion thermal resistors use domestic components, and the entire product has stable and reliable performance. Its service life is several times longer than that of similar anti-corrosion thermal resistors in China, and it can work for a long time in the temperature range of ≤ 220 ℃.
The thickness of the PTFE anti-corrosion layer for the anti-corrosion thermistor is 1.0mm (or can be determined by the user). Thermal response time: After anti-corrosion treatment, the thermal response time changes by about 20% (≤ 8S); Quality inspection of anti-corrosion coating for anti-corrosion thermistor: using electric spark micro hole inspection, voltage 12kV, frequency 1.6 × 106Hz without breakdown. Work pressure: The anti-corrosion thermistor is fixed with a maximum operating pressure of 4.0MPa during flange installation; The maximum operating pressure when fixing the anti-corrosion thermistor with F4 thread connection is 0.6MPa. Anti corrosion thermistor electrical outlet: M20x1.5, NPTI1/2, protection level: IP65, explosion-proof level: d ∥ BT4. d ∥ CT5. To have better quality,Tianchang Kangtai Instrument Cable Factory creates a sky for youOur company's (www.ahtk1718. com)