The wiring of input, output, and auxiliary power must be correct and not misplaced.

The usage environment should be free of conductive dust, corrosive metals, and gases that damage insulation, with an altitude of less than 2500 meters.

The zero point and accuracy of the product have been calibrated before leaving the factory. Please do not adjust them arbitrarily.

*Pay attention to the auxiliary power information on the product label. Do not connect the auxiliary power level and polarity of the transmitter incorrectly, otherwise it will damage the transmitter;

*The transmitter is an integrated structure that cannot be disassembled, and collision and falling should be avoided;

*When using the transmitter in an environment with strong magnetic interference, please pay attention to the shielding of the input line and the output signal should be as short as possible. When installing centrally, the minimum installation interval should not be less than 10mm;

*This series of transmitters does not have lightning protection circuits installed internally. When the input and output feeders of the transmitter are exposed to harsh outdoor weather conditions, lightning protection measures should be taken;

*This product is packaged in a flame-retardant ABS plastic shell, which can withstand a temperature of+85 ℃. When subjected to high temperature baking, it will deform and affect the product performance. Do not use or store the product near a heat source, and do not put the product in a high-temperature oven for baking;