1. If there is a bend, it should be installed at the bend of the pipeline as much as possible.
2. The sealing surface of the thermistor responsible for bearing pressure must be well sealed.
3thermal resistorThe cover of the junction box should be raised as much as possible to prevent water from entering.
4thermal resistorWhen installed on negative pressure pipelines or containers, the installation site should be well sealed.
5thermal resistorThe installation position needs to be kept as vertical as possible to preventthermal resistorThe protective tube deforms under high temperature.
6thermal resistorThe installation location should be chosen in a location that is convenient for construction and maintenance, and not easily susceptible to external damage.
7thermal resistorThe part exposed outside the equipment should be as short as possible and insulated to reduce heat loss and measurement errors.
8. When the measured medium has a flow velocity, it should be placed on the centerline of the pipeline and opposite to the direction of the measured fluid.
9thermal resistorWhen installing on the pipeline, sockets should be installed on the pipeline, which should be firmly connected to the pipeline and made of the same material.
10thermal resistorThe insertion depth can be determined according to the actual situation, but the length immersed in the tested medium should be greater than 8-12 times the outer diameter of the protective tube.
11thermal resistorWhen installed in a medium with solid particles and high flow rate, a protective plate can be added in front of it to prevent damage from long-term erosion.
12. When horizontal installation is necessary, a bracket made of refractory clay or heat-resistant metal should be installed for support, and the outlet hole of the junction box should be downward to prevent water vapor and other substances from entering due to poor sealing.
Anhui Tiankang CompanyThe five major series of instrument products produced, including temperature, pressure, level, flow, and complete sets, are all in a domestic position in terms of quality and scale, among which the independently developed supercritical is among themThermocouples, ThermistorsAfter being certified by national institutions, the product has been widely promoted in the nuclear power industry. We will continuously expand the production scale of instrument products, improve product quality, and strive to build a large temperature instrument production base. Welcome all users to come and discuss.