-
E-mail
anhuitiankang@163.com
-
Phone
13965985979
-
Address
No. 20 Renhe South Road, Tianchang City, Chuzhou City, Anhui Province
Anhui Tiankang (Group) Co., Ltd
anhuitiankang@163.com
13965985979
No. 20 Renhe South Road, Tianchang City, Chuzhou City, Anhui Province
Technical parameters of steel wire armored power cables
Steel wire armored power cableproduct standard
This product is produced according to the GB12706 standard for extruded insulated power cables and accessories with rated voltage of 1kV~35kV. It can also be produced according to the recommended standards of IEC, British standards, German standards, and American standards according to user needs.
Scope of application of steel wire armored power cables
This product is suitable for fixed installation in power distribution networks or industrial installations with a rated voltage of 0.6/1kV and below.
Steel wire armored power cableUsage characteristics
The rated voltage Uo/U of the power frequency is 0.6/1kV.
The maximum allowable long-term working temperature for cable conductors is 90 ℃
Allowable maximum temperature for cable conductor during short circuit (maximum duration not exceeding 5 seconds): 250 ℃
The ambient temperature during cable laying should not be lower than 0 ℃.
The bending diameter of multi-core cables shall not be less than 15 times the outer diameter of the cable, and the bending diameter of single core cables shall not be less than 20 times the outer diameter of the cable.
Cable model, name and purpose
model |
name |
|
YJV |
Copper core cross-linked polyethylene insulated polyvinyl chloride sheathed power cable Aluminum core cross-linked polyethylene insulated polyvinyl chloride sheathed power cable |
|
YJY |
Copper crosslinked polyethylene insulated polyethylene sheathed power cable Aluminum cross-linked polyethylene insulated polyethylene sheathed power cable |
|
YJV22 |
Copper core cross-linked polyethylene insulated steel tape armored polyvinyl chloride sheathed power cable Aluminum core cross-linked polyethylene insulated steel tape armored polyvinyl chloride sheathed power cable |
|
YJV23 |
Copper core cross-linked polyethylene insulated steel tape armored polyethylene sheathed power cable Aluminum core cross-linked polyethylene insulated steel tape armored polyethylene sheathed power cable |
|
YJV32 |
Copper core cross-linked polyethylene insulated fine steel wire armored polyvinyl chloride sheathed power cable Aluminum core cross-linked polyethylene insulated fine steel wire armored polyvinyl chloride sheathed power cable |
|
YJV33 |
Copper core cross-linked polyethylene insulated fine steel wire armored polyethylene sheathed power cable Aluminum core cross-linked polyethylene insulated fine steel wire armored polyethylene sheathed power cable |
|
production scope
| model | core count | Rated voltage U0/U KV | |||
| 3.6/6 6/6 | 6/10 8.7/10 | 12/20 18/20 | 21/35 26/35 | ||
Nominal cross-section of conductive wire core (mm)2) | |||||
| YJLV YJV YJLY YJY |
1 | 25-500 | 25-500 | 35-500 | 50-300 |
| YJLV32 YJV32 YJLY32 JYY32 |
1 | 25-500 | 25-500 | 35-500 | 50-300 |
| YJLV42 YJV42 YJLV43 YJV43 |
1 | 25-500 | 25-500 | 35-500 | 50-300 |
| YJLV YJV YJLY YJY |
3 | 25-300 | 25-300 | 35-300 | - |
| YJLV22 YJV22 YJLV23 YJV23 |
3 | 25-300 | 25-300 | 35-300 | - |
| YJLV32 YJV32 YJLV33 YJV33 |
3 | 25-300 | 25-300 | 35-300 | - |
| YJLV42 YJV42 YJLV43 YJV43 |
3 | 25-300 | 25-300 | 35-150 | |
Note: The single core cable armor used for AC circuits adopts a non-magnetic special structure and should be carefully selected.
Single core rated voltage 0.6/1kV cross-linked polyethylene insulated polyvinyl chloride sheathed power cable YJV, YJLV
Two core rated voltage 0.6/1kV cross-linked polyethylene insulated polyvinyl chloride sheathed power cables YJV, YJLV, YJV22, YJLV22
Three core rated voltage 0.6/1kV cross-linked polyethylene insulated PVC sheathed cables YJV, YJLV, YJV22, YJLV22