structure

The sensor part and signal processing circuit of TY-YB high-temperature pressure type liquid level transmitter are located inside the junction box. The gas injected into the liquid collection cylinder comes into contact with the medium, and the pressure is transmitted to the sensor through the gas pipe, avoiding direct contact between the sensor and the measured medium. This product is specially designed for high temperature or highly corrosive liquids, effectively solving the problem of difficult liquid level measurement for high temperature liquids.

Application:Especially suitable for measuring the liquid level of high temperature medium, small range, and highly corrosive media. Widely used in industries such as electricity, petroleum, chemical, metallurgical, water conservancy, tap water, food, etc.

Features:

Design *: Pressure guiding structure, easy installation, convenient use, strong interchangeability.

Specially suitable for high temperature, medium to small range liquids, and highly corrosive liquids

● Good stability: Fine zero point, full range, non-linear compensation, ensuring accuracy within the range of instrument usage conditions, long-term superior to0.2％FS/Year.

● High operating temperature: -30℃～+250℃

● High reliability.

Zero point and full-scale output can be adjusted on site

●Intrinsic safety explosion-proof

●Technical performance:

supplyPower supply: 24VDC;

Output signals: 0-5V, 1-5V, 4-20mA, 0-10mA, 10-2kHz;

Range: 0-0.1m... 50m water column;

Compensation temperature: 0-80 ℃;

Medium temperature: -30 to+250 ℃;

Environmental temperature: -20~85 ℃;

Material: All stainless steel;

Comprehensive accuracy: optional levels of 0.1, 0.3, and 0.5;

Zero temperature drift: ± 0.03% FS/℃;

Temperature drift: ± 0.03% FS/℃;

Overload pressure: 200% FS;

Long term stability: ≤ 0.2% FS