The TK5100 series liquid turbine flowmeter is based on the principle of torque balance and belongs to the velocity flow instrument. Sensors have the characteristics of simple structure, lightweight, high accuracy, good repeatability, sensitive response, and easy installation, maintenance, and use. They are widely used in industries such as petroleum, chemical, metallurgical, water supply, and papermaking.
Sensors and display instruments are used in conjunction, suitable for measuring liquids in closed pipelines that do not corrode stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3, hard alloys, and have no impurities such as fibers or particles. If matched with display instruments with special functions, quantitative control, over limit alarm, etc. can also be performed. The explosion-proof type (ExdIIBT6) of this product can be used in environments with explosive hazards.
The sensor is suitable for media with viscosity less than 5 × 10-6m ²/s at operating temperature. For liquids with viscosity greater than 5 × 10-6m ²/s, the sensor needs to be calibrated with real liquid before use. If users require special forms of sensors, they can negotiate to place an order. If explosion-proof sensors are needed, they should be explained in the order.
High precision, generally up to ± 1% R, ± 0.5% R, high-precision type up to ± 0.2% R; (R refers to reading error)
Good repeatability, short-term repeatability can reach 0.05% to 0.2%. It is precisely because of good repeatability that high accuracy can be achieved through regular calibration or online calibration, and flow meters are preferred for trade settlement;
Output pulse frequency signal, suitable for total measurement and computer connection, no zero drift, strong anti-interference ability;
The original pulse frequency range (10Hz~1.5KHz) has strong signal resolution;
Wide range ratio, 10:1~20:1;
Compact and lightweight structure, easy installation and maintenance, and high circulation capacity;
Suitable for high-voltage measurement, the sensor body does not need to be perforated, making it easy to make into a high-voltage instrument;
Can be made into an insertion type, suitable for measuring large diameters, with low pressure loss, low price, can be removed without interruption, and easy installation and maintenance.
The TK5200 tangential and axial insertion type turbine flow sensor (referred to as the sensor) is matched with the display instrument (converter part) to form an insertion type turbine flowmeter, which can be widely used for measuring the flow rate and total amount of liquids such as source water, circulating water, and purified water in large-diameter pipelines.
Product Features
Characteristics of tangential sensors
Strong anti impurity ability, tangential impeller can release impurities in the fluid at any time during rotation, so that they do not wrap around the blades of the impeller.
Strong resistance to electromagnetic interference and earthquake resistance.
The structure and principle of sensors and display instruments are very simple and intuitive, making it particularly easy for users to master their usage and maintenance techniques.
After replacing the impeller and bearings, the instrument coefficient remains unchanged.
Wide flow range and low lower limit flow rate.
Almost no pressure loss, saving power and electricity consumption.
The sensor can be installed outdoors, and the entire sensor can be submerged in water for a long time.
The installation and disassembly of sensors with shut-off valves do not require interruption of flow.
Characteristics of axial sensorsThe structure and principle of sensors and display instruments are very simple and intuitive, making it particularly easy for users to master their usage and maintenance techniques.
After replacing the impeller and bearings, the instrument coefficient remains unchanged.
Wide flow range and low lower limit flow rate.
Almost no pressure loss, saving power and electricity consumption.
The sensor can be installed outdoors, and the entire sensor can be submerged in water for a long time.
The installation and disassembly of sensors with shut-off valves do not require interruption of flow.
Horizontal, vertical, and inclined pipelines can all be used.
The purchase, installation, and maintenance costs of complete flow meters are low.
Sanitary turbine flowmeter is a flow measuring instrument that can be widely used in industries such as pharmaceuticals, food, and beverages, as a measuring, ingredient, control, and finished product filling device. The instrument casing is made of stainless steel, and the movement part is made of special materials, which have good anti-corrosion and rust prevention capabilities. The overall structure of the instrument breaks through traditional techniques and adopts optimized design from foreign countries, greatly improving the accuracy and repeatability of the instrument. Specially designed for the pharmaceutical and beverage industries, using a quick connect structure for easy cleaning. This product has reached the international standard of similar products and is an ideal instrument for the healthcare industry.
Product FeaturesInternational standards that can replace similar imported products
Anti corrosion and anti rust material, suitable for the hygiene industry
Quick installation structure, easy to install and maintain
High precision and good repeatability
High quality turbine, beyond the conventional range