Welcome Customer !

Membership

Help

Anhui Zhongwangte Cable Co., Ltd
Custom manufacturer

Main Products:

ybzhan>Article

Anhui Zhongwangte Cable Co., Ltd

  • E-mail

    903092774@qq.com

  • Phone

    15655066688

  • Address

    Tianchang Economic Development Zone, Anhui Province

Contact Now
Silicone rubber cable standard, silicone rubber cable process
Date: 2016-03-17Read: 13

This product is applicable to power transmission lines for fixed laying or connecting cables for mobile appliances with AC rated voltage of 0.6/1KV and below. The product has the characteristics of heat radiation resistance, cold resistance, acid alkali resistance, corrosive gas resistance, waterproof, etc. The cable structure is soft, radiation convenient, electrical performance is stable under high temperature (high cold) environment, anti-aging performance is outstanding, and service life is long. It is widely used in metallurgy, power, petrochemical, electronics, automobile manufacturing and other industries.

Implementation standard for silicone rubber power cables: Flame retardant and fire-resistant characteristics test in accordance with GB12666-90 requirements

Characteristics of use of silicone rubber power cable 1

1. Rated AC voltage: U0/U 0.6/1KV

Z high working temperature: 180 ℃

Low ambient temperature: Fixed installation -60 ℃

2. The temperature for cable installation and laying should not be lower than -25 ℃.

3. Allowable bending radius of cable: Cable Z is less than 10 times the outer diameter of the cable

Basic models and names of silicone rubber power cables: Table 1

model

Product Name

YGC

Silicone rubber insulated and silicone rubber sheathed power cable

YGCR

Silicone rubber insulated silicone rubber sheathed mobile power flexible cable

YGCP

Silicone rubber insulated, silicone rubber sheathed, copper braided shielded power cable

YGC22

Silicone rubber insulated, silicone rubber sheathed, steel tape armored power cable

JGG

Installation line with silicone rubber insulation and silicone rubber sheath

JGGR

Silicone rubber insulation, silicone rubber sheath, mobile installation flexible wire

JGGP

Silicone rubber insulation, silicone rubber sheath, copper braided shielding installation wire

JHXG

Silicone rubber insulated motor lead wire

Note: ZR should be added before the model of flame-retardant silicone rubber cable, and tin plating can be used for the copper wire in the conductor core.

Silicone rubber power cable code name and meaning: Table 2

code name

Meaning of code

Y-series code mobile flexible cable

G-Silicone rubber

C-Heavy duty

22- Steel belt armor

P-Copper Braided Shielding

R-multi stranded conductor

J-Motor lead wire

Main technical indicators of silicone rubber power cables

1. The R-class DC resistance of the finished cable conductor meets the requirements of GB3956, refer to Appendix A Table 1 and Table 2.

The insulation resistance at 2.20 ℃ shall not be less than 100M Ω/KM

3. The finished cable shall withstand an AC 50HZ3.5KV/5min voltage test without breakdown.

Part 2: Silicone rubber control cable

This product is suitable for installation in mobile or fixed devices with an AC rated voltage of 450/750V.

The cable has good flexibility, high temperature resistance, corrosion resistance, voltage resistance and other advantages.