Sponge foam cutting machine (laboratory)

GCPQ-100

1、 Main application scope and functions

This machine is mainly used for cutting foam materials. It can cut hard foam, soft foam and plastic into squares, rectangles and strips. It has the advantages of high cutting efficiency, accurate cutting size and high degree.

2、 Main technical requirements:

1Cutting display resolution: 0.01mm

2Cutting size accuracy: ± 1mm

3Workbench size: 1000 × 700mm (can be customized according to user needs)

4The effective travel of the movable workbench is 500mm

5、 Zui small cutting size: 25 × 25 × 10mm

6、 Thickness of the largest sample: 250mm

7Power supply voltage: 220V

8Power: 2.2KW

9Equipment dimensions: length, width, and height=1700 * 1200 * 1650 (mm)

3、 Structural features:

1The machine is equipped with a movable cutting and sizing device. To ensure the accuracy of cutting dimensions, a digital display ruler is equipped.

2The movable workbench adopts negative pressure adsorption to fix the cut foam.

3When stopped, equipped with manual and automatic devices.

4The red brake button is used for manual braking. When the start button is pressed, it becomes invalid

5When the brake solenoid is engaged, press the start button and the brake solenoid will immediately release.

4、 Main equipment configuration

1One test host

2A set of control system

3One set of adsorption device

4One digital ruler

5Drive motor one

6One cutting blade (additional piece)

7One sharpening wheel blade

8One set of vacuum cleaner