How to print the test report of plastic friction and wear tester

Technical parameters and accuracy

1. Sample size: Sample 1: Width 104mm thickness and 4mm length are not required

Sample 2: Length 90Width 55Last 2 millimeters or length 99Width 40Drill holes in the length direction of the last 3 millimeters, with a hole spacing of 68Millimeter or 84Millimeters, hole diameter of 5.5Between 6mm and 6mm.

2. Test load: Friction test load 0-1000N, continuously adjustable;

3. Rotating friction speed 0-40HZ, continuously adjustable;

4. Reciprocal friction frequency 0~20HZ， Continuously adjustable;

5. Temperature sensor: 0-200degree

6. Servo motor speed accuracy: 0.1%;

7. Accuracy of torque sensor: 0.5%;

8. Accuracy of force sensor: 0.5%;

9. All parameter settings and detection values are automatically generated by the software, and data collection can be exported in formats such as EXCEL.

10. According to the operation of the instrument, when the measured value exceeds the normal range, there is an automatic shutdown protection due to safety factors such as the instrument itself and personnel