Groundwater level gauge/water level gauge model: M608 Solinst 101D Warehouse number: M411430

Water level gauge is a sturdy and easy-to-use water level measuring instrument. It can perform continuous monitoring inside the well or exploration hole

Measuring ruler specifications

The polyethylene strip rolls smoothly and can remain soft and vertical in the well without considering the influence of temperature There are scale markings every millimeter or 1/100 foot for easy reading The MAX length of the 3/8 foot wide strip is 6000 feet (1800 meters)

The stainless steel conductor inside the strip can resist corrosion This makes the strip very easy to repair and hinge The dog bone design reduces the likelihood of sticking to wet surfaces

M2 feet and one percent feet: one mark every 1/100 feet

M3 meters and millimeters: one mark per millimeter

Water level gauge P2 standard probe:

Stainless steel material with chloroprene rubber stress relief Not suitable for immersion in any deeper water Easy to repair

Size: Diameter 0.55 inches, Length 7.5 inches (14mm x 190mm)

Water level gauge P7 submersible probe:

Stainless steel material, leak proof probe The design is simple, similar to P2, using an O-ring to submerge to a depth of up to 1000 feet (300 meters) underwater

Easy to clean and able to hang vertically in the well

Size: Diameter 0.5 inches, Length 7.5 inches (12.7 mm x 190 mm)

Features:

Marking with one scale every 1/100 foot or every millimeter

Protective probes can avoid false readings

Hot dip scale markings

Tensile resistant stainless steel conductor

Durable and corrosion-resistant components

Sturdy, soft strap, easy to articulate