Used for periodic motion measurement to detect imbalances and deviations in moving machinery.

Specially designed for on-site measurement of various mechanical vibrations, in order to provide data for quality control, operating time, and prior equipment maintenance.

Select high-performance accelerometers to achieve accurate and reproducible measurements.

The mechanical vibration tester has the function of measuring the condition of bearings.

Mechanical vibration testerProduct Introduction

1. Each channel is independent of AD, and real-time synchronization is carried out for collection, display, and storage.

2. Network expansion.

3. The sampling frequency is switched in stages from 1HZ-500HZ.

4. High speed ARM processor, real-time digital filtering, constitutes a high-performance anti aliasing filter for analog filtering and digital filtering.

5. Each module has 8 channels, and each computer can control up to 256 measurement points to work synchronously at the same time.

6. DMA control mode ensures real-time data transmission without code leakage.

7. The communication distance between modules can reach 1000m, and cascading can be achieved. At the same time, optical fibers can be connected, and the distance is not limited.

8. Strain measurement is completed using full bridge, half bridge, and 1/4 bridge methods.

9. The system can directly input voltage signals.

The application software developed in VC++environment has completed the parameter setting, balancing, real-time display, analysis, storage, and strain flower calculation of instruments.