☆ Measurement mode setting:

☆ Use the measurement mode selection switch to select the measurement mode: high-frequency acceleration (H); Acceleration (A); Speed (V); Displacement (D).

☆ Measurement:

(1) Attach the sensor (with magnetic seat) to the object being measured, press the "M" key to measure.

(2) After the vibration value stabilizes, release the "M" button and the vibration value will be "held". At this moment, the value can be read, and it will automatically shut down after 15 seconds.

(3) The contact between the probe (built-in acceleration type) and the surface of the measured object during measurement should be at a right angle, and a pressure of about 0.5 kilograms should be applied. Otherwise, the measurement results will be inaccurate.

Equipped with vibration detection, bearing status analysis, and infrared temperature measurement functions. It is easy to operate, automatically indicates status alarms, and is very suitable for on-site equipment operation and maintenance personnel to monitor equipment status, detect problems in a timely manner, and ensure the normal and reliable operation of equipment.