-
E-mail
13810083196@163.com
-
Phone
13911237038
-
Address
Building 2, Chaomingyuan, Boxing 10th Road, Yizhuang Economic and Technological Development Zone, Beijing
Beijing Pusanda Instrument Technology Co., Ltd
Programming functions and operating instructions for programmable high and low temperature cycling boxes
Date: 2025-10-27Read: 8
Programmable high and low temperature circulation boxAs an important device for environmental simulation testing, its flexible programming function provides strong support for reliability testing of various products. Mastering its programming characteristics and operating essentials can fully utilize the testing efficiency of the equipment.
1. Advantages and Characteristics of Programming Functionality
Programmable high and low temperature circulation boxThe core advantage lies in its multi-stage programming capability. Users can pre-set multiple stages of temperature changes based on testing requirements, including key parameters such as heating rate, constant temperature time, and cooling rate. This flexible programming capability enables the device to simulate various complex environmental changes and temperature fluctuations during use.
Programming systems typically support loop functionality, which allows for setting the number of repetitions of the test program to meet the requirements of long-term reliability testing. Some devices also have custom program storage capabilities, allowing users to save commonly used test plans and call them directly when needed, greatly improving testing efficiency. The time control function allows for precise setting of the duration of each testing phase, ensuring the accuracy of the testing process.
2. Basic operation process
Equipment operation first requires familiarity with the basic layout and functions of the control panel. Before starting, the equipment status should be checked to ensure that the water level in the tank is normal and the door seal is good. When programming, it is usually recommended to first select the preset mode or enter the custom programming interface, and set the temperature change program according to the testing standards or product requirements.
Program settings generally include defining elements such as initial temperature, target temperature, conversion time, and holding time. Users can adjust the values by increasing or decreasing, and some devices support graphical interfaces for intuitive observation of temperature change curves. After the setting is completed, the program logic should be carefully checked to confirm that the parameters of each stage are reasonable and the transition is smooth.
3. Advanced operational skills
It is very important to set the temperature change rate reasonably during the programming process. Excessive temperature rise and fall may lead to stress concentration in the product, affecting the authenticity of the test results. Choosing an appropriate speed based on product characteristics can ensure testing efficiency and obtain reliable testing data.
The application of loop function can simulate environmental changes during long-term use of the product. By setting multiple cycle periods, it is possible to evaluate the performance stability of the product under repeated temperature changes. Some devices support nested programming, that is, calling subprograms in a main program, which is particularly suitable for complex test requirements.
After the operation is completed, the test program should be saved in a timely manner for future use. During the operation of the equipment, attention should be paid to the testing status through observation windows or monitoring systems, and any abnormalities should be promptly addressed. After the test is completed, shut down the equipment according to standard procedures and perform necessary maintenance.
Programmable high and low temperature circulation boxThe programming function of provides great flexibility for environment simulation testing. By utilizing these functions reasonably, testers can accurately reproduce various environmental conditions and provide scientific basis for product quality assessment.