Glass softening point tester model: RHY-I

1、 Characteristics and Applications
The glass softening point tester is designed according to the experimental conditions specified in JC/T 751-84 (96) "Testing Method for Softening Point of Quartz Glass (Drawing Method)". Testing the softening point of transparent quartz glass.
2、 Working conditions
1. The working environment is between 5 ℃ and 35 ℃.
2. The relative humidity of the environment shall not exceed 85%.
3. There is no vibration, corrosive medium, or strong electromagnetic field interference around.
4. Place on a sturdy and flat workbench.
5. Power supply AC220V ± 5% 50HZ 2000W.
6. The equipment is at least 0.2m away from the wall.

3、 Main technical parameters
1. Temperature regulation range for the experimental area: room temperature -1000 ℃;
2. Experimental area: 80 millimeters;
3. Temperature control accuracy: ± 1 ℃;
4. Temperature measurement accuracy: ± 1 ℃
5. Power supply: 220V ± 10%, 2.5 kW;
5. Equipment dimensions: 400 × 500 × 650mm
6. Weight: Approximately 50kg.
4、 Structure
The glass softening point tester consists of a main unit, an electrical control cabinet, etc.