1、 There are two sampling methods (contact type and non-contact spray type), which can point, strip and square. Different sampling methods shall be selected according to different thin-layer plates. For example, when clicking soft plates (hand planks), the contact type can be selected, because the silica gel may be blown away if the spray method is selected.

2、 It has heating function. When the sample size is large or the solvent is difficult to evaporate (such as aqueous solution), heating can be chosen for sample application to reduce spot diffusion.

3、 The height of the sampling table can be adjusted to spot thin plates of different thicknesses without the need to adjust the sampling head.

4、 It won't block the needle. When suctioning, the instrument first uses a sharp hollow stainless steel tube to pierce the sample bottle gasket, and then the needle is inserted into the solution through the stainless steel tube for suctioning, so that the needle will not be blocked by the silicone rubber fragments of the gasket.

5、 The operation of the instrument is carried out through winCATS software, which can simultaneously control digital imaging systems, scanners, etc. A computer can control several instruments simultaneously.

6、 Verification function. WinCATS has a calibration function and can calibrate ATS4.

7、 The instrument can also work independently. Download the method from winCATS, store it in the microprocessor of the instrument itself, select the method through the instrument panel, and press "RUN" to start working without connecting to a computer.

8、 Less space occupied. Sampling, sampling, etc. are all integrated to save space.