One Coarse Crushing - ST-E200 Desktop Jaw Crusher

ST-E200 desktop jaw crusher is an instrument used for laboratory solid sample preparation. It has the characteristics of low noise, fast crushing speed, and equipped with a sample size adjustment device. Rough crushing and pre crushing of brittle, hard, medium hard, and tough materials, such as ores, rock cores, rocks, slag, soil, ceramics, brittle material products, dried shells, dried sea cucumbers, and other samples.

Instrument parameters:

1. Feed particle size: ≤ 45mm

2. Zero point calibration: Yes

3. Discharge particle size: ≤ 0.5mm

4. Speed: Adjustable from 100-1000rpm

5. Funnel: Foldable

6. Sample size adjustment range: 0-11mm (adjustable)

7. Motor power: 1.1kw

8. Power supply: AC 220V ± 10%, 50Hz

9. Jaw plate material: high manganese steel, stainless steel, zirconia, tungsten carbide

Instrument features:

1. Desktop design, saving experimental space, LCD touch screen operation, simple and fast parameter settings

2. Zero point calibration is used to compensate for wear and ensure the accuracy of sample fineness

3. Continuous adjustment of sample fineness, digital display

4. The instrument has dual safety lock protection, which prevents the instrument from running when the feeding hopper is opened or the collection box is not installed, ensuring the safety of the operator

5. The feeding hopper has anti splash design to prevent sample splashing

6. The feeding hopper can be flipped over, the jaw plate does not require tool disassembly, and the crushing chamber is easy to clean

7. Forward and reverse rotation can be set, and the direction of jaw plate movement can be reversed to prevent sample jamming and ensure continuous and stable grinding process

IIFine grinding - ST-Q200 planetary ball mill/ST-B200 bowl grinder

ST-Q200 multi platform planetary ball mill

The ST-Q200 planetary ball mill is a stable instrument suitable for grinding (dry or wet grinding) and mixing soft, medium hard, hard, and brittle samples. The grinding results are uniform and reproducible, and it is suitable for scientific research and industrial sectors such as geology, soil, metallurgy, electronics, power, materials, chemical, pharmaceutical, beauty, environmental protection, ceramics, glass, nuclear research, etc.

Instrument features:

(1) Adjustable speed, smooth operation

(2) Control mode: manual operation and automatic operation

(3) Sealed dust-proof design for grinding room with observation window

(4) Control the input energy and speed to enable grinding

The results are reproducible

(5) Two different grinding modes (dry grinding and wet grinding)

(6) Multiple material grinding tanks and ventilation tanks are available for selection

(7) Large LCD touch screen operation display, convenient program setting

(8) The grinding room is designed to be sealed and dust-proof, with an observation window

(9) Low noise technology, quiet operation, environmentally friendly

2. ST-B200 bowl grinder

ST-B200 bowl grinder is a multifunctional grinding and crushing instrument widely used in various industries. It can mix and grind samples that are soft, hard, brittle, viscous, or moist, including dry grinding, wet grinding, and frozen grinding. Multiple anti pollution grinding kits are available to prevent contamination of the sample during the grinding process and ensure the accuracy of experimental results.

Instrument parameters:

(1) Feed size: ≤ 10mm

(2) Discharge size: approximately 10-20um

(3) Batch processing capacity: 10-230ml

(4) Storage programs: 10 types of storage programs

(5) Time setting: 1s-99min59s (continuously adjustable, LCD display)

(6) Speed: 20-150r/min (continuously adjustable, LCD display)

(7) Intermittent time: 1s-99min59s (continuously adjustable, LCD display)

(8) Intermittent running time: 1s-99min59s (continuously adjustable, LCD display)

(9) Power: 200W

(10) Power data: AC 220V ± 10%, 50Hz

Instrument Features

(1) LCD touch screen operation mode, complete functions, widely used

(2) The pestle pressure has a scale display, which can be adjusted at any time to ensure the fineness of the sample

(3) Grinding time up to seconds, resulting in highly reproducible results

(4) Suitable for dry grinding, wet grinding, and frozen grinding

(5) Intermittent mode is suitable for grinding thermosensitive samples

(6) Safety door control device, protective cover open, instrument automatically stops, ensuring the safety of operators

(7) The mortar and pestle adopt a plug-in design, which is easy to disassemble and clean

(8) Using high torque, * reduction motor, low noise, high output energy, and improving grinding efficiency by 30%

3、 Screening - ST-A200 3D Electromagnetic Vibration Screening Instrument

ST-A200 vibrating screen is a new generation laboratory vibrating screen that uses electromagnetic drive to generate three-dimensional throwing motion effects. It is matched with different specifications of analytical screens and can meet the particle size classification and measurement of powders, particles, blocks, and suspended solids. It has the advantages of high measurement accuracy, reproducibility of screening results, and low noise.

Instrument parameters:

1. Time display: 1s-99min59s

2. Measurement range: 20 μ m-30mm

3. Amplitude: 0-3mm (continuously adjustable, LCD display)

4. Storage programs: 10 types of storage programs

5. Dry sieving and wet sieving: both are acceptable

6. Interval time: 1-99min59s (continuously adjustable, LCD display)

7. Intermittent operation time: 1s-99min59s (continuously adjustable, LCD display)

8. Load: 6kg

9. Level: Level 9

10. Analysis sieve diameter: 200/300mm

11. Power supply: AC 220V ± 10% 50Hz

Instrument features:

1. Controllable amplitude and frequency to ensure accurate screening

2. LCD touch screen operation mode, complete functions, wide application range

3. One machine dual-use, suitable for both dry and wet screening

4. The instrument has stable performance, operates quietly, and does not require maintenance

5. Memory storage for 10 screening programs

6. Analyze and screen integrated stamping forming

4、 Sample analyzer - ST-F200 rotary automatic sample analyzer

The ST-F200 rotary sampler is an instrument that divides a whole sample into several small samples on average. Each sample has the same physical and chemical properties and can represent the overall properties of the sample. Equipped with an automatic sampler, it can achieve automatic injection and sample distribution.

Instrument parameters:

1. Feed size: ≤ 12mm

2. Batch processing capacity: ≤ 5000ml

3. Storage programs: 10 types of storage programs

4. Time setting: 1s-99min59s (LCD display)

5. Speed: 20-150r/min (LCD display)

6. Power data: AC 220V ± 10% 50Hz

Instrument features:

1. LCD touch screen operation mode, can preset time, speed, and injection speed, easy and fast operation

2. High sampling accuracy and representative results

3. Multiple volume sample bottles are available to meet different experimental needs

4. Sampling time up to seconds, results with repeatability

5. Configure a synchronized automatic sampler to achieve automated feeding and automate the entire sampling process

6. The sample bottle adopts a plug-in loading and unloading design, which only requires simple insertion and rotation to achieve the installation and disassembly of the sample bottle

7. Compact design, no maintenance required

8. The instrument has an RS232 data transmission interface, which facilitates software program upgrades and maintenance of the instrument

9. The instrument is equipped with a strong magnetic anti-interference system, ensuring stable operation

Instrument Summary:

1. Easy disassembly and assembly of accessories, no need for tools, easy cleaning, and elimination of cross contamination

2. All have safety control devices to prevent misoperation and prevent accidents from occurring

3. There are optional anti metal pollution accessories available

4. The instrument does not require special maintenance and can be cleaned after operation

5. The instrument comes with a two-year warranty and lifetime maintenance