Separatory funnel oscillator

Main parameters of JW-A separating funnel oscillator:

1. Sample quantity: ≤ 1000ml, 6 pieces

2. Oscillation amplitude: 40mm

3. Oscillation frequency: 0-300 times/minute

4. Frequency control: digital display, digital variable speed display.

5. Oscillation mode: vertical oscillation

6. Timer: 0~9999min

7. Suitable for: 150ml, 250ml, 500ml, 1000ml separating funnels, stoppered bottles, etc.

Specific use case of JW-A separating funnel oscillator:

1. Determination of organochlorine pesticide residues in urban tap water

2. Determination of methanol content in cosmetics

3. Determination of residual content of insecticide ring in rice

4. Analysis method for hygiene standards of edible hydrogenated oil and margarine

5. Determination of Fructose and Starch Syrup in Honey

6. Determination of Benzoic Acid in Fruits and Vegetables

7. Determination of Apple Hawthorn Products

8. Extraction of HEMF, a component of soy sauce aroma

9. Extraction of Copper and Iron from Wine

10. Extraction of oil from water

11. Extraction of environmental hormones

12. Extraction of active ingredients from tablets

13. Secondary growth (public water bodies, groundwater)

14. Extraction of Samples for Cadmium Analysis in Fish

15. Dissolution test of heavy metals in soil

16. Extraction operation of pre-processing for environmental analysis

17. Extraction of natural substances such as food and oil

18. Pesticide residue extraction

19. Extraction of harmful substances from soil

20. Extraction of water pollution detection

Note: This instrument comes standard with six fixtures (additional fixtures can be purchased if needed).

JW-A is a regular type, with vertical oscillation mode; JW-B is a multifunctional type, with oscillation modes of vertical and inclined oscillation..

The main features of JW-A separating funnel oscillator are:

1. JW-A type adopts vertical oscillation mode, while JW-B type adopts both vertical and inclined oscillation modes to obtain greater mixing force.

2. Low noise, maintaining a stable oscillation frequency for a long time.

3. Stainless steel fixtures are easy and convenient to install and remove samples.

4. Multiple sample racks are available for selection to meet various inspection requirements.

Precautions for JW-A separatory funnel oscillator:

1. The rated parameters of the power supply provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures. This product uses a 220V AC power supply, and the power socket should use a three hole safety socket, which must be properly grounded.

2. Connect the power supply, display through the temperature control meter, and operate according to the product manual.

3. Proper use and maintenance of equipment to keep it in good working condition can extend its service life.