one、Application of ultrasonic cleaning machine:

Professional department use: suitable for laboratories, hospital dentistry, electronic workshops, etc

Applicable products: circuit boards, computer accessories, electronic products, mechanical hardware parts, golf balls, etc

Family use: necklaces, earrings, bracelets, razor heads, pen tips, coins*

two、Advantages of Ultrasonic Cleaning Machine

1.Digital display sets ultrasonic cleaning time

2.Working hours display

3.1-99999Minute total working time setting

4.Equipped with stainless steel mesh basket and soundproof cover

5.The inner and outer shells of the instrument and the sound reduction cover are made of304stainless steel

6.The operating program of the instrument adopts single-chip software

7.Power off memory function for working parameters

three、Characteristics of Ultrasonic Cleaning Machine Products

JDSB -1000DUltrasonic cleaning machine with three guarantees and one year of lifelong maintenance!

four、TheJDSB -1000DInstructions for using ultrasonic cleaning machine
1、 Check if there is any leakage in the grounding wire and power cord of the ultrasonic cleaning machine.
2、 Add cleaning solution to the cleaning tank.When cleaning,The height of the deep liquid level shall not be lower than one-third of the cleaning tank,Not exceeding two-thirds of the cleaning tank.When cleaning,Please meet different cleaning requirements,Add detergent,Strengthen cleaning efficiency,All detergents must comply with non corrosive cleaning machine tanks and bodies.
3、 Plug in the power supply of the ultrasonic cleaner220VThree core power socket,Turn on the power switch,The indicator light is on.,Set scheduled cleaning time,The liquid surface exhibits bead like fluctuations,And accompanied by vibration sound,Indicates that the cleaning machine has entered the working state.
4、 Set the cleaning temperature according to the cleaning needs (referring to machines with temperature control)
5、 Put the cleaning material into the metal frame,Set the cleaning time based on the degree of scale accumulation of the cleaning material,average3~30minute,Substances that are particularly difficult to clean,The cleaning time can be appropriately extended.“NO”Indicating continuous work,“OFF”Indicates shutdown.
6、 Heavier objects,Hang it in the cleaning solution through a hanger,Enhance cleaning effectiveness,Improve cleaning quality (directly placing it will affect the cleaning effect).Smaller objects,Can be cleaned in a glass containing cleaning solution.Generally does not affect the cleaning effect.
7、 Remove the cleaning material,Replace the cleaning solution and perform ultrasonic cleaning again, or rinse thoroughly with water directly.
8、 When not in use for a long time,The cleaning solution in the tank should be drained completely,And clean the body thoroughly.
5JDSB -1000DSafety precautions for ultrasonic cleaning machine
1、 Before use,Please read the operating manual carefully
2、 Before using the cleaner,There must be a reliable grounding device.
3、 It is strictly prohibited to carry open flames and sparks during work at the workplace.
4、 Using it thoroughly,When volatile flammable liquids such as acetone and gasoline are present,Should be stamped,Be particularly careful.
5、 Do not let the temperature of the cleaning solution exceed80℃.Usually cleaned under normal and medium temperature conditions.
6、 There is no cleaning solution in the tank,Do not turn on or heat up,To prevent damage to the cleaning device when unloaded.
VIJDSB -1000DMaintenance and upkeep of ultrasonic cleaning machine
This machine is a valuable equipment,Special personnel should be responsible for use, maintenance, and upkeep.Regularly inspect the equipment.
a） Check for looseness, overheating, moisture, and poor contact at all contacts of the power supply and output lines.
b） Check the mesh cover of the ultrasonic power supply cooling fan,Clean the dust on the surface of the internet.
c） Check the tightness of the bottom plate of the cleaning tank,Is there any surge or leakage.
d） If the ultrasonic oscillator is found to be detached or the power tube is burned out,Please communicate with the factory.
e） Try to avoid working for long periods of time during use,To extend the service life.
7、 Packing list:
cleaner 1Taiwan
Instructions card for use 1copy
Warranty Card 1copy
basket 1only
Sound reduction cover 1A customizable non-standard ultrasonic cleaning machine