Digital display high-temperature constant temperature oil bath pot manufacturer

~1、 Detailed introduction:
Warm oil bath is a constant temperature oil bath pot used in soil and fertilizer stations. Made of stainless steel and advanced technology, with digital temperature measurement. All performance indicators meet the requirements of national standards. It has the advantages of high temperature control accuracy, strong corrosion resistance, compact structure, energy saving, and long service life. It is widely used for precision constant temperature direct or auxiliary heating in scientific fields such as biology, physics, plants, chemical engineering, and environmental protection.
2、 Digital Display High Temperature Constant Temperature Oil Bath Pot Manufacturer Oil Bath Pot Technical Parameters
Specification: Suitable for 96 hole digestion rack
Power supply: 220V 50HZ
Rated power: 2500W
Temperature control range: RT --300 ℃
Temperature fluctuation: ± 2 ℃
Oil temperature uniformity: ± 2 ℃
Studio capacity: 600 × 300 × 120mm
Packaging size: 85 × 44 × 42cm
3、 Digital display high-temperature constant temperature oil bath pot manufacturer, oil bath pot usage method
Before use, it is necessary to add oil at least 1cm higher than the bottom lining plate to the fuel tank. Then turn on the power, the digital display head lights up and shows the current oil temperature. Set temperature: Press the SET key to set or view the temperature setpoint. Press the SET key once and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again and the instrument will return to normal working state. The temperature setting is complete (if the temperature controller is intelligent, a separate temperature control manual will be attached). If the temperature is lower than the oil temperature inside the box, the heating will not work.
4、 Precautions
1. Before use, please remember to add oil at a height of 1cm above the bottom lining plate before turning on the power. Do not turn on the power before adding oil to the box to avoid burning out the electric heating tube.
2. Remember to cut off the power before draining the oil.
3. Properly grounded for safety.