Metal tube float flowmetermaintain:

1: It is necessary to ensure the cleanliness of the instrument, especially the surfaces of the orifice plate, spinal canal, and float in the instrument must be kept clean. Therefore, the instrument should be removed and cleaned after a period of use.

2: The two covers of the indicator must be sealed to prevent dust from entering and affecting normal operation.

3. If the instrument runs unstably and the pointer jumps, the main reason is not only the pulse of the flow rate itself, but also the possibility of two-phase flow in the medium (i.e. the presence of both liquid and gas phases). As long as measures are taken to eliminate the existence of two-phase flow, the stable operation of the instrument can be ensured.

Metal tube float flowmeter accessories:

We can provide users with accessories such as front and rear straight pipe sections, matching flanges, magnetic filters, gas damping devices, etc. If the medium contains ferromagnetic particles, a magnetic filter should be installed at the inlet of the flowmeter. The magnetic filter is equipped with magnetic rods arranged in a spiral manner to minimize pressure loss to the greatest extent possible. Each magnetic rod is wrapped in PTFE polytetrafluoroethylene to prevent corrosion of the medium.