Dual telecentric lens paired with high-resolution camera for measuring precision hardware components, OPTO Germany

Product Name: Far Center Lens

Model:100-BTC-003，100-BTC-005，100-BTC-006，100-BTC-008

Brand: GermanyOPTO

GermanyOptoThe company has been dedicated to optical research, design, and modification for many years, and has been applied in industries such as industry, education, and healthcare. The dual telecentric lens developed in the past two years can be applied to measure precision hardware. The dual telecentric lens has the characteristics of zero distortion, low distortion, zero angle error, and large field of view, and can be used for high-precision measurement. Higher measurement accuracy than traditional lenses. This lens has been tested and certified according to German optical experience standards. compatible with500megapixel2/3Inch camera and1000megapixel1/2.5inchCMOS.

Measuring precision hardware equipment is equipped with dual telecentric lenses and high-resolution cameras(for example:GermanyIDSGermanyAVTGermanySVSGermanyBaslerAnd DenmarkJaiwait)Composed of parallel light sources and rapid measurement software,Simplify the complex,Replacing the traditional cumbersome operation mode in the field of measurement, reducing human error and making product measurement more accurate and efficient.

The product contour will be automatically captured within the visible range, so that the product will not have different measurement results due to personal habits and skills, eliminating human measurement errors;

No need to establish coordinates, no need for fixture positioning, products can be measured by placing them freely, and can be recognized simultaneouslyNMeasure each product and display the current measurement status;

Product can be importedCADDrawings enable product comparison and offline programming, improving measurement efficiency;

The measurement results can be outputWORD，EXCEL，CADWaiting for format, measurement data can be doneSPCStatistical analysis to keep track of production status at all times;

It can replace traditional projectors and automatic imagers for rapid measurement.

It can be used to measure and classify products on the assembly line.

The lens related parameters are as follows: