This equipment is an experimental testing device. Please do not use this device for purposes other than specified testing and materials. Please improve the installation environment. Please keep it at room temperature. Places with low humidity. Places with less than 80% no condensation and low levels of dust and dirt. Please install the test materials as required. Install the test materials as required, otherwise unexpected failures may occur. When carrying out wiring and maintenance operations, please make sure to turn off the power. To prevent accidents and electric shock caused by the loss of control of the machine during the operation, please make sure to turn off the power before starting the operation. Regarding the power supply of this device, please pay attention to the following matters. In principle, the distribution method adopts a three-phase 380V power supply. Regarding power supply and power engineering, please consult with electrical engineering personnel or individuals with equivalent knowledge. Please make sure to use the power cord provided with the device for the power cord. When abnormal conditions are found in the power cord and power plug,

Drop testing machine, specifically designed to test the damage to product packaging caused by falls and evaluate the impact resistance during transportation and handling. Adopting dual column guidance and adjustable height drop times, it works stably and reliably, and can achieve edge, surface, and corner drops