Zhongshan Yuanfeng Lighting Technology Co., Ltd. has ordered a constant temperature and humidity test chamber from Aipei Technology for use in the R&D laboratory. This choice has three advantages: technical adaptability, operational convenience, and service guarantee. The following is a specific analysis:

1、 Technical adaptability: Accurately covering the research and development needs of the lighting industry

Temperature and humidity range and accuracy

The Aipei Technology test chamber provides a temperature range of -70 ℃ to+150 ℃ and a humidity range of 20% RH to 98% RH, which can simulate environmental conditions. For example, its AP-HX-100B model has a temperature fluctuation of ± 0.5 ℃ and a humidity deviation of ± 2% RH, which can accurately test the performance degradation of lighting fixtures in high, low, and high humidity environments, meeting national standards such as GB/T2423.

Rapid temperature change rate

The R&D room requires frequent switching of testing conditions, and the Aipei equipment supports non-linear temperature change rates ranging from 1 ℃/min to 15 ℃/min (such as the AP-HX-225D3 model with a heating rate of 3 ℃/min). This function can shorten the testing cycle, for example, the efficiency of cold and hot shock testing of lamps can be increased by 40%.

Uniformity and stability

Adopting balanced temperature and humidity control technology and guide plate air duct design to ensure insulation and humidity uniformity of ≤ ± 2 ℃ (such as AP-HX-100B model). To avoid distortion of test data caused by local temperature and humidity deviations, which may affect research and development conclusions.

2、 Convenient operation: reduce the learning cost of R&D personnel

Intelligent control system

Equipped with a 7-inch touch screen or a true color LCD screen in both Chinese and English, supporting 120 sets of programs and complex test settings of 100 segments per set (such as AP-900 intelligent controller). R&D personnel can quickly set temperature and humidity curves through a conversational interface, reducing operational errors.

Data recording and export

The device can record temperature and humidity parameters for 90 days (such as AP-HX-225D3 model), which is equivalent to equipping a paperless recorder. Data supports USB/RS232/RS485 interface export, making it easy to interface with R&D management systems and improve data traceability efficiency.

user-friendly design

Observation window and lighting: The main door is equipped with an anti condensation observation window (such as AP-HX-100B model), which facilitates real-time observation of the sample status.

Test hole and pulley: Provide a 50mm diameter test hole for external power lines, and the bottom pulley is designed to facilitate equipment movement (such as AP-HX-100B model with a load-bearing capacity of 200kg).

3、 Service guarantee: Ensure long-term stable operation of equipment

Quick response to after-sales service

Aipei Technology provides 48 hour on-site repair service and promises a one-year free warranty (such as AP-HX-225D3 model). For the R&D department, equipment downtime may lead to project delays, and quick after-sales service can reduce losses.

Regular maintenance plan

Free cleaning of the condenser (air-cooled equipment) every 3 months, and maintenance with power on every half month (during long-term shutdown). This service can extend the lifespan of equipment, for example, dust accumulation in the condenser can cause a 20% decrease in refrigeration efficiency, and regular cleaning can avoid such problems.

Technical training support

Provide one free on-site training service to ensure that R&D personnel master the equipment operation specifications (such as temperature and humidity sensor calibration, over temperature protection settings). To avoid equipment failure or invalid test data caused by misoperation.

4、 Industry case studies validate equipment reliability

Hunan Techeng Electric Appliances purchases the Aipei 225 liter test box for the research and development of power transmission and transformation equipment, verifying the insulation performance of the equipment at -40 ℃ to+150 ℃, and enhancing the competitiveness of the product in the market.