Salt spray corrosion test chamberIt is a testing equipment that simulates salt spray in nature to rapidly corrode products. The test chamber tests the corrosion resistance of products after surface treatment of various materials, including coatings, electroplating, rust proof oil, and other anti-corrosion treatments. The salt spray corrosion test chamber is suitable for salt spray corrosion testing of metal products and components, electronic components, and protective layers of industrial products.

Under normal usage,Salt spray corrosion test chamberThe following experimental conditions must be met:

1. The salt spray corrosion test chamber should be made of materials that are not affected by salt spray testing;

2. The volume of the test chamber should be large enough, not affected by airflow and the test sample, and have stable and uniform conditions;

3. The equipment should be equipped with appropriate ventilation holes to balance the air pressure inside and outside the box, and to evenly distribute salt spray.

4. The exhaust end of the ventilation hole should be able to avoid strong salt spray airflow caused by exhaust.

5. During the experiment, salt spray should not be directly sprayed onto the test sample;

6. Salt spray liquid that condenses on the equipment board, side walls, and other parts of the test chamber should not drip onto the test sample;

7Salt spray corrosion test chamberUsed salt solution shall not be reused;

8. If compressed air is used, the air should not contain any impurities such as oil, dust, etc. when entering the nozzle;

9. To ensure that the nozzle of the salt sprayer is not blocked by salt droplets, the relative humidity of the air at the nozzle should not be lower than 85%.

Aisili Corporate Spirit: Achieving Self through Action, Creating Value through Dedication, Turning the Impossible into Reality