Precision touch four door oven

07.25,20239

Brief Introduction

Product Name: Precision Touch Oven

Product Model: CX-TK4S-145

The KB-TK series products are mainly used for high-temperature testing, drying, baking, and disinfection of non-volatile and non flammable and non explosive test samples. They can also be used for general constant temperature testing work and are equipment used in laboratories and research institutions.

This product has the following characteristics:

◆ Adopting a block assembly structure, the surface is coated with epoxy powder electrostatic spraying technology;

Using digital display and temperature setting, it can reduce visual and operational errors;

◆ It has independent over temperature protection, over-current protection and other functions.

Control method

Balanced temperature control system (BTC)+specially designed fan forced air circulation system, controls SSR in a P.I.D. manner to ensure that the heating amount of the system is equal to the heat loss, thus enabling long-term stable use

Technical Specifications

At room temperature of 25 ℃, when unloaded

temperature range	Room temperature+10 ℃~+300 ℃
temperature fluctuation	±0.5℃
Temperature Uniformity	±1.5%℃
heating rate	Heating rate ≥ 4-6 ℃/minute Raise the room temperature to 200 ℃ with a heating rate of ≤ 45 minutes
internal dimensions	W830×H370×D475×4 mm
external dimensions	W2100 * H1500 * D720 mm (subject to actual product)

product structure

Inner box material	stainless steel plate
Outer box material	Iron plate baking paint (beige)
Cavity structure	Four chamber combined type, with two upper and two lower chambers, each chamber independently controls temperature and time, and the control box is located above the machine
Control method	7-inch touch screen control, four chamber independent control, independent operation
Insulation material	High density fiberglass insulation cotton
Tightly pressed	8 high temperature resistant tightening strips
Inlet and exhaust ports	The exhaust vent has a diameter of 100mm and is located directly behind the machine
Exhaust port	Integration of exhaust motor ducts An independent exhaust system collects exhaust air below the lower level of the oven
Wind cycle mode	Rear mounted motor, horizontal circulation mode
Storage rack	A storage rack at the bottom of the box
Heater	Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China
Box door	Clear touch button handle
call the police	The alarm system consists of three color lights with sound and light
Overtemperature protection	Ultra mild and working temperature are displayed as digital displays When the circulating fan fails or exceeds the set temperature for overheating The device will sound an alarm and automatically disconnect the heating system

protective device

1. Contactor: Schneider from France

2. Thermal relay: Schneider from France

3. Temperature controller: Kebao

4. Over temperature protector: Taiwan, China, China

5. No fuse switch: Taiwan, China, China

6. Solid state relay: Taiwan, China, China

7. Switch button: Taiwan, China

8. Dry burning protector: Italy

Last Video: Package and ship the constant temperature and humidity test box

Next Video: Vickers hardness tester