150 Constant Temperature and Humidity Test Chamber

12.18,202411

Brief Introduction

Product Name: Constant Temperature and Humidity Test Chamber

Product model: KB-TH-S-150G. Z.D

Product Introduction: Constant temperature and humidity test chamber, also known as constant temperature and humidity testing machine, constant temperature and humidity test chamber, constant temperature machine or constant temperature and humidity chamber, is an equipment used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for quality testing of electronic, electrical, communication, instrument, vehicle, plastic products, metal, food, chemical, building materials, medical, aerospace and other products. Compliant with standards: GB/T5170.5-2008, GB/T10586-2006, GB/T2423.1-2008 Test A, GB/T2423.2-2008 Test B, GB/T2423.3-2006 Test Ca, GB/T2423.4-2008 Test Db

Technical Specifications
Inner box dimensions	W×H×D ：500×600×500(mm)
outer box dimensions	W×H×D ：1030×1470×1040(mm)
temperature range	G: -20℃— +100℃（150℃） Z: -40℃— +100℃（150℃） D: -70℃— +100℃（150℃）
humidity range	20% RH —98% RH
Control stability	Temperature ± 0.5 ℃, humidity ± 2.0%
Uniformity of distribution	Temperature ± 2.0 ℃ Humidity ± 3.0%
heating rate	3 ℃/min (approximately 25 minutes from -40 ℃ to 30 ℃) nonlinear no-load
降温速率	1 ℃/min (reduced from 30 ℃ to -40 ℃ for about 70 minutes) Nonlinear no-load
Temperature limit	Temperature+150 ℃ * Temperature -70 ℃
product structure
Inner box material	SUS # 304 mirror stainless steel plate
outer box material	Cold rolled steel plate painted with paint or 304 # stainless steel plate
Insulation material	Hard Polyurethane foam+glass wool
packing	Silicone foam tightening 1 strip
shelf	There are 2 height adjustable stainless steel shelves inside the box (material: SUS # 304 mirror stainless steel)
heater	Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China
humidifier	Design of Split Type Humidifier Cylinder
Wind turbine	1 motor/stainless steel extended shaft/multi wing fan blade aluminum alloy wind wheel (SIROCCO FAN)/special adjustable hundred page air supply circulation system
door of the box	Single door, double-layer door, embedded non reactive flat handle/four layer vacuum tempered glass enlarged window/electric automatic defogging, imported lighting tube
Humidity system	One 15L stainless steel water tank is hidden inside/One automatic water supply pump (automatically supplying water from the lower water tank to the upper water tank)/Water recovery device/Water shortage alarm device
Freezing system
compressor	*French "Taikang" brand fully enclosed compressor
condenser	Fin type attached platform dispersing hot air fan
evaporator	Fin type multi-stage automatic load capacity adjustment
expansion valve	Danfoss components from Denmark
refrigerant	Imported environmentally friendly refrigerant R404A from the United States
Refrigeration auxiliary components	Desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported parts

Last Video: Promotion of Kebao Experimental Equipment

Next Video: Three layer high temperature test chamber