When conducting experiments using a fully automatic calorimeter,add waterPlease note the following points:

Preparation work for adding water:Prepare clean water and ensure that the water quality meets the experimental requirements.

Steps for adding water:Open the water valve of the fully automatic calorimeter and wait for the water to flow out. Immerse the water inlet pipe into the reaction vessel, ensuring that the end of the water inlet pipe is below the liquid level. Slowly add water while observing the liquid level inside the reaction vessel. Do not add too quickly to avoid splashing water droplets. When the liquid level rises to the desired height, stop adding water and close the water valve.

Precautions for adding water:

1. Check the water inlet pipe: The water inlet pipe should be clean and the pipeline should be unobstructed to avoid experimental errors.

2. Water quality: Do not use turbid or untreated water.

3. Monitoring liquid level: During the process of adding water, pay attention to observing the liquid level to prevent excessive or insufficient water addition. In the experiment, it is necessary to continuously monitor the liquid level, adjust the amount of water added in a timely manner, and maintain the stability of the liquid level in the reaction kettle.

In order to thank new and old users for their support and love of our company's products, our team will provide technical support and after-sales service. We will also continuously share some coal knowledge, operating procedures, instrument maintenance, common problems, and precautions with everyone.

If you want to know more aboutIndustrial AnalyzerFor more details, please stay tuned Hebi Hengfa Instrument Co., Ltd / ，：