Using the original

The GSH-1008 series radar level gauge emits and receives extremely short microwave pulses with low energy through an antenna system. Radar waves travel at the speed of light. The running time can be converted into level signals through electronic components. A special time extension method can ensure stable and accurate measurements in a very short period of time. The GSH-1008 series radar level gauge can accurately analyze the echo of the level even in complex working conditions with false echoes, using new microprocessor technology and debugging software.

input
The antenna receives reflected microwave pulses and transmits them to the electronic circuit. The microprocessor processes this signal and identifies the echoes generated by the micro pulses on the surface of the material. The correct recognition of echo signals is completed by intelligent software, with an accuracy of up to millimeter level. The distance D from the surface of the material is proportional to the time travel T of the pulse:
D=C×T/2
Where C is the speed of light
Since the distance E of the empty tank is known, the level L is:
L=E-D
output
By inputting the empty tank height E (=zero), full tank height F (=full range), and some application parameters to set, the application parameters will automatically adapt the instrument to the measurement environment. Corresponding to 4-20mA output.
Application medium:
The JDD800 series radar level gauge is suitable for non-contact continuous measurement of the level of liquids, slurries, and particulate materials, and is suitable for large temperature and pressure changes; In situations where inert gases and volatiles are present.
The measurement method adopts microwave pulses and can operate normally within the industrial frequency range. The beam energy is low and can be installed in various metal and non-metal containers or pipelines, without causing harm to the human body and the environment.