1. The instrument must have a good grounding.

2. Connect the output terminal of the console to the input terminal of the generator, connect the instruments to each other, turn on the air switch, and the current regulator is waiting for the current to rise.

3. Rotate the voltage regulator evenly clockwise, paying attention to the output current indication on the console until the desired high current is reached

4. During the experiment, if any abnormal phenomenon is found, the power supply of the air switch should be immediately cut off, and the cause should be identified before conducting the experiment.

5. After the experiment is completed, the voltage regulator must be reset to zero, the power supply must be cut off by pressing the air switch, the working power supply must be cut off, and the test wiring must be removed to ensure safety.

A high current generator, also known as a current booster, is a high current testing equipment and device. Its high current generator has strong load capacity and is suitable for primary bus protection and calibration of current transformer ratios. It can also calibrate current relays and switches.