The SCK600 electrical fire monitoring system is a new generation of electrical fire monitoring system developed with the main purpose of early warning and monitoring of electrical fires, utilizing digital technology and adopting a distributed design scheme. This system has passed the mandatory 3C certification of the National Fire Electronic Product Quality Supervision and Inspection Center, and can be applied to large shopping malls, hotels, public buildings, intelligent buildings, petrochemicals, industrial and mining enterprises and other places with high fire hazards.

The SCK600 electrical fire monitoring system can be installed in TN-S, TN-C-S, and local T low voltage distribution systems. The system includes SCK680 electrical fire monitoring equipment, SCK600 electrical fire monitoring detectors, residual current transformers, temperature sensors, and other accessories. Electrical fire monitoring detectors are used to monitor parameters such as residual current, load current, and cable temperature in the circuit, and upload them to the monitoring equipment for centralized control and management; When the relevant parameters in the circuit are abnormal, the monitoring equipment emits an audible and visual alarm to indicate the alarm location. At the same time, the on-site detector emits an audible and visual alarm and control signal to remind users to investigate or replace the hidden danger circuit, reducing the risk of fire caused by electrical reasons.

The SCK600A series products are independent residual current detectors that can monitor in real-time the residual current and cable temperature caused by ground faults in live wires in low-voltage distribution systems, in order to identify and warn of potential electrical fire hazards. The SCK600C series of combined electrical fire monitoring detectors is a high-precision combined electrical fire monitoring detector that integrates residual current, temperature, and various electrical parameter measurements. It achieves real-time alarm and protection of residual current, temperature, and various electrical parameters, with strong reliability and high stability.

SCK680-B is based on an ARM core high-performance microcontroller embedded operating system platform. By communicating with on-site electrical fire monitoring detectors and recording and transmitting data, it not only achieves real-time monitoring of on-site electrical safety, but also provides real-time feedback on alarm signals from fire monitoring detectors, displays alarm locations, and records and saves alarm information.

SCK600YT uses NTC temperature sensors to monitor 4 temperature signals, and is connected to electrical fire monitoring equipment or monitoring units through the fire protection secondary bus to achieve functions such as alarm and fault reporting.

The SCK880-B fire equipment power status monitor is the host of the fire power monitoring system, which is used to collect data from signal sensors and display it centrally. It is installed in the fire control center and uses an ARM core high-performance processor, embedded operating system, and a 5-inch industrial grade dot matrix LCD screen; Equipped with sound and light alarm function, and can display detailed information of the fault location in real time.