-
E-mail
2835078515@qq.com
-
Phone
13791029259
-
Address
Dikou Road, Tianqiao District, Jinan City
Jinan Jiugong Electromechanical Equipment Co., Ltd
The blind hole method stress detector needs to strictly follow the operating procedures
Date: 2023-08-14Read: 4
Blind hole method stress detectorIt is a scientific instrument used to determine the stress distribution in materials or structures. The following introduces its specific operating procedures, including equipment inspection, test preparation, sample preparation, test operation, data processing, and test result analysis.
1、 Equipment inspection
1. Power on and check if all parts of the instrument are functioning properly, including the display, controller, sensors, etc;
2. Check whether the power supply, grounding, protective grounding, zero position measurement, etc. are normal;
3. Check if the working environment of the equipment meets the requirements.
2、 Preparation for the experiment
1. Select appropriate experimental methods and procedures;
2. Prepare qualified test materials or structures;
3. Prepare necessary testing tools and measuring equipment;
4. Identify the test materials or structures for ease of operation and data processing;
5. Arrange the test site to ensure the safety of the test.
3、 Sample preparation
1. Select appropriate sample specifications based on experimental methods and procedures;
2. Pre treat the sample as required, including grinding, cutting, etc;
3. Measure and label the dimensions of the sample;
4. Arrange the samples according to the requirements of the detector.
4、 Experimental operation
1. Start the equipment, set relevant parameters according to the test method and procedure;
2. Start the blind hole method stress detector and test the sample;
3. During the experiment, monitor the experimental data in real-time to ensure its accuracy and reliability;
4. After the experiment is completed, turn off the equipment and clean up the site.
5、 Data processing
1. Calculate and analyze the stress distribution based on experimental data;
2. Organize and summarize the experimental results to form an experimental report;
3. Conduct internal review of the test results to ensure the accuracy and reliability of the data.
6、 Analysis of experimental results
1. Analyze the stress state of materials or structures based on the stress distribution calculation results;
2. Evaluate the performance of materials or structures based on experimental results;
3. Based on the experimental results, optimize the design and processing of materials or structures.
During the operation of the blind hole stress detector, it is necessary to strictly follow the operating procedures to ensure the safety, accuracy, and reliability of the test.