Paperless recorderThe 6 configuration methods are as follows“

(1) Time and channel configuration. Used for configuring or correcting dates, clocks, recording points, and sampling periods.

(2) Configuration of page and record spacing. The output signal mode of each channel, the upper limit of the range, the upper limit of the alarm, the filtering time constant, and the setting of square root or square root. Regarding flow signals, they can also be used as square root, flow accumulation, and compensation for flow, temperature, and pressure.

(3) Due to the single engineering unit of the output signal, suitable engineering units can be selected through configuration. If equipped with a PID control module, a PID control loop can be completed.

(4) Configuration of communication information. Used for setting communication addresses and communication methods for microcomputers.

(5) Select configuration on the display screen. The paperless recorder can display nine or more screens. It can be configured to select the required display screen.

(6) Configuration of alarm information. The setting of upper and lower limits, lower limit, lower upper limit, and upper limit alarm contacts for each channel.