If not maintained according to normal maintenance measures, it will gradually age and affect its performance. Over time, it will shorten its lifespan. In order to maximize its efficiency, we have prepared the following targeted solutions for youPorous material dust analyzerMaintenance.
Porous material dust analyzerMaintenance of electrodes:
1. When the measuring electrode is contaminated, it can be wiped with acetone or anhydrous ethanol. If it still cannot be cleaned, the platinum ball end can be burned with an alcohol lamp.
2. When the electrolytic electrode is contaminated, acetone or anhydrous ethanol can be injected into the cathode chamber and shaken repeatedly to remove internal dirt.
Drying of electrolytic cell:
Decompose the electrolytic cell and dry it in an oven at about 50 degrees Celsius for five hours. After it cools naturally, add the reagent.
If not maintained according to the above formal methods, the porous material dust analyzer will be passivated if it is light, and scrapped if it is heavy. From this, it can be seen how important maintenance is. I hope you have gained some understanding of the maintenance of porous material dust analyzer through this article.