Why choose ultrasonic flowmeter?

① Electromagnetic flowmeter: The electrode contacts the measured fluid and is susceptible to corrosion and electromagnetic interference; Vortex flowmeter: prone to scaling or entanglement of debris causing measurement instability, unstable measurement at low flow rates, and greatly affected by vibration; Orifice flowmeter: The sensor is susceptible to corrosion and wear, resulting in inaccurate measurements. The sensor part also increases the resistance of the pipeline network; Ultrasonic flowmeter is a non-contact flow measurement instrument. During the measurement process, the sensor components do not come into contact with the measured fluid, so it does not obstruct flow, has no corrosion, has a long service life, and is not affected by stray electrical signals. ②Ultrasonic flowmeterIt is possible to install and maintain other flow meters without stopping production, and this advantage is very obvious in industries such as metallurgy, electricity, and heat. ③ Multiple types of ultrasonic flow meters are available for users to choose from. Namely wall mounted, disk mounted, integrated, portable, and explosion-proof types.Wall mounted ultrasonic flowmeterThe converter is suspended on a vertical plane.Disk mounted ultrasonic flowmeterThe converter is installed on the dashboard.Integrated ultrasonic flowmeterConverter and sensor integrated, used for pipe segment sensors.Portable ultrasonic flowmeterPortable use, mobile measurement, equipped with magnetic sensors.Explosion proof ultrasonic flowmeterUsed for measuring liquid flow in explosive environments, it is a general and intrinsically safe type. The converter is a general type with a charged isolation barrier, and the sensor is an intrinsic safety type. The various types of ultrasonic flow meters mentioned above can be equipped with three types of ultrasonic sensors, namely pipe segment sensors, plug-in sensors, and external clamp sensors. Tube segment sensor: accuracy of 0.5 level. It is necessary to cut open the pipeline for installation, but there is no need to stop production (water supply) for future maintenance. ④ National regulationsUltrasonic flowmeterThe calibration cycle for flow meters is three years, while for other flow meters it is generally six months or one year.