Regarding how to use, maintain, and care for a walk-in high-temperature aging room in daily use, please pay attention to the following:

1. Before use, check if the voltage is correct. Please use the voltage indicated on the device to avoid excessive electricity consumption and fire hazards.

2. Is the direction of motor operation normal? If there is airflow discharged from the air outlet, it is considered normal. (Only applicable to models with three-phase voltage of 380V).

When there is a significant difference between the displayed temperature and the actual temperature (measured by a standard thermometer), the components and internal parameters of the circuit board cannot be adjusted arbitrarily. The company should be notified to send staff to handle it.

4. Do not open the machine door casually when the temperature changes during use.

5. Do not place the machine in damp places or rinse it directly with water to prevent electrical leakage.

6. It is prohibited to place flammable and volatile substances such as alcohol and adhesives inside the machine to prevent accidents.

7. When using flammable materials near the machine, they should be kept away appropriately to prevent accidents.

8. Please be careful when placing items into the machine. If the temperature is above 60 ℃, please wear high-temperature gloves.

When there is a significant overshoot or underestimation between the displayed temperature and the set temperature during constant temperature, automatic calculation is required.

10. The heater inside the machine should be regularly inspected to remove dust and other impurities.