MH-20 Friction and Wear Testing Machine

Equipment usage:

The MH-20 Friction and Wear Testing Machine is designed and manufactured according to GB3960-2016 "Plastic Sliding Friction and Wear Test Method", and is suitable for measuring the sliding friction and wear properties of composite materials such as plastics and rubber. Measure the friction force and coefficient of friction of the sample.

This instrument adopts microprocessor control, data processing, and micro printing.

Technical Indicators:

1Sample size:

^{+1.0 -0.1}

30 ×7 ×6±0.2

^{+0.5 -0.2}

2. Transmission speed: 200 revolutions per minute ± 5%

3. Load: 20KG ± 1%

4. Friction ring:

The deviation of the concentricity between the outer and inner surfaces of the chamfer of HRC40~45 # steel with a diameter of 40 × 10mm and an angle of 0.5 × 45 ° is less than 0.01

5. Friction torque: 0-4N · m ± 2%

6. Counter: 0~

7. Microprocessor control, data processing, micro printing

Basic configuration:

1. One host

2. One torque sensor

3. A set of weights

4. One friction ring

5. One set of control system

6. One micro printer

7. Leverage

Note: Due to technological advancements, information may be changed without prior notice. The actual product in the future shall prevail.