【 Model FT-JS1 】 Fengtu Technology: A professional manufacturer, dedicated team, and fast response, creating a reliable backing in one. The low-lying road waterlogging monitoring system is a powerful assistant for urban flood prevention, with practical and critical functions. The system has built a comprehensive remote monitoring network that can monitor low-lying roads 24/7, regardless of day or night, working days, or holidays, and maintain an online status to continuously collect information on road water accumulation.
It senses the water level in real-time through various sensors distributed in low-lying road sections, and stably transmits the data to a remote monitoring center. At the monitoring center, management personnel can check the water accumulation status of each road section at any time, and have a clear understanding of the actual situation as if they were on site.
Once the water level exceeds the preset safety threshold, the system will immediately trigger an alarm mechanism. Alarm information will be quickly conveyed to relevant responsible persons through various channels, such as SMS notifications, system pop-up reminders, etc., to ensure that relevant personnel can be informed of the danger, arrange drainage operations in a timely manner, set up traffic warning signs and other response measures, effectively reduce the impact of water accumulation on road traffic and urban operation, and ensure urban safety during floods.

1、 Product Introduction
The buried urban waterlogging monitoring system is supported by Internet of Things technology and integrates intelligent sensing and intelligent services into an intelligent monitoring system.
The system consists of a monitoring host, pole support, power supply system, buried water accumulation monitoring device, LED dual color display screen, and cloud platform. It mainly provides real-time monitoring and early warning for urban roads, ground, tunnels, overpasses and other places that are prone to water accumulation.
The system adopts highly integrated integrated water accumulation monitoring equipment to monitor the water level in low-lying sections of the urban area in real time and achieve automatic alarm. By integrating data from various monitoring points, it can grasp the overall water accumulation situation in the urban area and timely carry out drainage scheduling. With the help of this system, the municipal administration departments can achieve regular monitoring, early warning and early preparation, deal with the places where floods may occur due to rainstorm, reduce the probability of urban salvage, and at the same time, do a good job of early warning for the people in the areas where water level rises. The traffic management department can obtain real-time water levels of various road sections through this system, and provide travel guides for the general public through media such as radio and television, avoiding personnel and vehicles from entering deep water sections, reducing economic losses for the public, and ensuring their personal safety.
2、 Application scope
It can be applied to urban management, municipal transportation roads, residential areas, low-lying areas, underground parking lots, logistics parks, agricultural irrigation areas, tourist attractions, and can also be used for smart city construction.
3、 Technical parameters
1. Host part
| power supply |
AC220V |
| power supply method |
Mains or solar power supply |
| Device power consumption |
≤25 W |
| Operating Temperature |
-40~80℃ |
| device interface |
interface type |
Instructions |
| LED screen display interface |
Dual color LED display screen (maximum dots 96 * 16) |
| Upstream 485 acquisition |
485 communication distance of 2000 meters |
| Two way switch interface (reserved) |
Voltage input range: 0-5V |
| Two analog interfaces (reserved) |
Collection range: 4-20mA, 0-5V, 0-10V default 4-20mA |
| One way water immersion detection (reserved) |
Can detect the presence or absence of water |
| Two relay interfaces |
Relay capacity: 250VAC/30VDC 3A. One circuit can be set to active and passive, used for alarm or automatic control |
| Alarm equipment |
Support sound and light alarm |
Support voice broadcasting |
| LED screen |
Size 102cm * 22cm dual color screen |
| Equipment bracket |
2-meter pole |
| control box |
Used for placing remote telemetry terminals and power supplies |
2. Underground water accumulation monitoring device section
| power supply method |
Built in battery power supply (3.6V lithium-ion battery) |
| battery life |
Can work continuously for 5 years without standing water |
| Water level range |
≤1.5m |
| Water level error |
1cm |
| resolution |
1mm |
| output signal |
LORA wireless spread spectrum signal |
| Shell material |
304 stainless steel |
| Protection level |
IP68 |
| Installation method |
Adopting buried installation |