oneGenerally speakingThe dosage of sodium hypochlorite should be determined based on the COD content in the wastewater. Compared with wet oxidation treatment, the cost savings are significant. Only 20-30% of the cost of wet oxidation treatment. Sodium hypochlorite is a strong oxidant and disinfectant, which is produced by electrolyzing dilute solutions of widely available and inexpensive industrial salts or seawater without membranes. To ensure the freshness and high activity of sodium hypochlorite and its disinfection effect, the sodium hypochlorite disinfection equipment is used while adding the generated sodium hypochlorite. It has the same oxidizing and disinfecting properties as chlorine and its compounds. Its efficacy is equivalent to chlorine, making it a true, broad-spectrum, and safe strong sterilizing and killing agent.

Project: Xuedian Water Plant, Xinzheng City, Zhengzhou City, Henan Province

Equipment: One set of HCCL-500 sodium hypochlorite generator

Hechuang SeriesChloric acid co disinfectant generator (electrolysis method), plate test method adopts the process of adding sodium salt solution containing chlorine into the generator, and producing hypochlorous acid liquid disinfection equipment through electrolysis. Has a synergistic broad-spectrum ability to quickly and effectively kill Bacillus subtilis, Pseudomonas aeruginosa, Salmonella, Legionella, and Escherichia coli, etc; It has good killing effect on typhoid, hepatitis B, cholera, etc. And it does not generate chlorinated organic compounds (carcinogenic, teratogenic, mutagenic substances). The procurement of raw material sodium chloride for this equipment is convenient*An ideal alternative product in the field of drinking water disinfection. The working principle is to add a sodium salt solution containing chlorine to the anode of the electrolytic cell, add clean water to the cathode, and turn on the power to electrolyze. At the same time, multiple pure disinfectant gases are generated in the yang chamber, which are then inhaled and mixed through a water injector to form a disinfectant solution of a certain concentration, which is added to the water to be treated.