Drinking water disinfection equipmentWidely applicable for disinfection and algae removal in various fields such as drinking water, industrial circulating cooling water, municipal sewage, hospital sewage, oilfield reinjection water, swimming pool water, aquaculture water, etc; And the treatment of cyanide containing wastewater, phenol containing wastewater, and printing and dyeing wastewater for cyanide removal, phenol removal, and decolorization. Specially suitable for pre oxidation, disinfection, algae removal, and deodorization in the construction process of large and medium-sized water plants for surface water sources, as well as in the renovation process of old chlorinated water plants. The traditional method of disinfecting drinking water in our country uses liquid chlorine, but liquid chlorine disinfection inevitably produces harmful byproducts such as chloroform, which are carcinogenic, mutagenic, and teratogenic. Therefore, chlorine dioxide has been used to disinfect drinking water in Europe and America for nearly a hundred years. With environmental pollution and the improvement of the national standard for drinking water, chlorine dioxide will gradually become the protagonist of drinking water disinfection.

Instructions for using drinking water disinfection equipment:

1. Preparation: Remove the water bottle from the water dispenser, drain the remaining water inside the dispenser, clean the water inlet, wipe the surface of the water dispenser dry with a towel, and install a clean empty bottle.

2. Connect the two silicone interfaces of the sterilizer to the water outlet of the water dispenser, turn on the water dispenser faucet, select the relay time, clean once a month for 5 minutes, disinfect once every two months for 10 minutes, and clean once every three months for 15 minutes. This data is for reference only.

3. Connect the power, turn on the switch, and the sterilizer will start working.

4. After disinfection is completed, the instrument will automatically stop, unplug the power and silicone interface, close the wires, lock the instrument box, and turn off the water dispenser faucet.

5. Remove the empty bottle of the water dispenser, fill it with purified water, and pour out about 300 milliliters of water from each of the two outlets to make the purified water in the dispenser drinkable.