Welcome Customer !

Membership

Help

Shandong Hechuang Zhiyun Environmental Protection Equipment Co., Ltd
Custom manufacturer

Main Products:

ybzhan>Article

Shandong Hechuang Zhiyun Environmental Protection Equipment Co., Ltd

  • E-mail

    1113414870@qq.com

  • Phone

    15376689510

  • Address

    Room 1011, Building B, Wanda Office Building, Kuiwen District, Weifang City

Contact Now
So these are the "seven major components" of the sodium hypochlorite generator
Date: 2022-06-23Read: 8
  Sodium hypochlorite generatorNot only can it act on the cell wall and outer shell, but also because hypochlorous acid molecules are small and uncharged, they can penetrate into the bacterial body and undergo oxidation reactions with organic macromolecules such as bacterial proteins, nucleic acids, and enzymes, thereby killing pathogenic microorganisms. Again, the chloride ions produced by hypochlorous acid can significantly alter the osmotic pressure of bacteria and bodies, causing cells to lose activity and die.
Main component functions of sodium hypochlorite generator:
(1) Water jet injector: A water jet injector is a type of air extraction component designed based on the principle of jet flow. When power water passes through the water jet injector, negative pressure is generated inside, and external gas is sucked into the water jet injector under the pressure difference, thereby achieving suction. The inhaled dioxide is mixed with some to form disinfectant, and the water jet is also used for absorption in the raw material tank.
(2) Metering pump: conveying raw materials and regulating flow rate.
(3) Reflector aeration port : an air channel for equipment operation. During installation, it can be connected to a pipeline and open to the outside, while maintaining communication with the atmosphere.
(4) Electric contact pressure gauge: An electric contact pressure gauge is one of the devices that protect the safe operation of equipment. Its working principle is that when the water pressure at the front end of the water injector is lower than the set value, the gauge controls the metering pump to stop feeding.
(5) Raw material level sensor: The raw material level sensor is also one of the devices that protect the safe operation of equipment. It is installed at the bottom of two raw material tanks. When any one of the raw materials is used up, the metering pump will stop feeding.
(6) Temperature controller: The temperature controller is the heating control mechanism of the system, which determines the optimal chemical reaction temperature of sodium chlorate and hydrochloric acid.
(7) Controller: The controller is the control core of the chlorine dioxide generator, which completes the entire automatic control of the system.