-
E-mail
269774106@qq.com
-
Phone
18678183068
-
Address
No. 102, Zone B, Baoxin Industrial Park, High tech Zone, Zibo City, Shandong Province
Shandong Hongcheng Automation Technology Co., Ltd
Installation and usage precautions for cable safety spikes
Date: 2025-08-21Read: 9
Cable Safety PiercerIt is a specialized tool used for safely piercing the insulation layer of cables in power operations, and its correct installation and use are directly related to operational safety. 
1、 Installation precautions
Before installation, it is necessary to confirm the safety of the working environment and choose a dry, ventilated, and away from flammable and explosive materials location. Check whether all components of the stabbing device are intact, especially the stabbing head, control device, and connecting parts, which should be free of defects such as deformation and cracks. Strictly follow the instructions during installation to ensure that all components are securely and reliably connected. The installation of the piercing head should be kept perpendicular to the cable axis to avoid uneven piercing caused by tilting. Special cables are required for power connection to ensure good insulation and reliable grounding. After installation, a no-load test should be conducted to check whether each component operates normally. Only after confirming that there are no abnormalities can it be put into use.
2、 Preparation before use
Operators need to undergo training and be familiar withCable Safety PiercerThe working principle and operating method. Before use, carefully check the cable identification, confirm the voltage level, purpose, and direction of the cable to be punctured, and avoid misoperation. Wear complete personal protective equipment, including insulated gloves, insulated shoes, and safety helmets. Designate a safe work area, set up clear high-voltage danger warning signs, and prohibit non operators from entering. Check whether the insulation performance of the stabbing device is good, and ensure that the tool surface is free of damage, moisture, and other phenomena. Choose the appropriate piercing head and piercing depth according to the cable type and insulation layer thickness, and strictly prohibit using beyond the range.
3、 Precautions during use
When operating, keep your hands dry, hold the stabbing device correctly, and apply even and stable force. During the stabbing process, pressure should be slowly applied to avoid sudden force causing tool slippage or cable damage. Closely observe the puncture situation, immediately stop the operation and investigate the cause. It is strictly prohibited to move the cable or change the piercing angle during the piercing process to ensure accurate piercing position. After the piercing is completed, the pressure should be released first, and then the piercing head should be slowly withdrawn to avoid damaging the internal conductor of the cable. After use, the stabbing device should be cleaned in a timely manner, the wear of each component should be checked, and the tool should be properly stored.
Cable Safety PiercerThe standardized installation and use are important links to ensure the safety of power operations. Operators must strictly comply with safety regulations and take various protective measures to ensure safe operations and reliable operation of equipment.