Shandong Tianhe Environmental Technology Co., Ltd
lixin@yunjingtianhe.com
15666887396
Room 206, Building 1, Weifang High tech Zone Optoelectronic Industry Accelerator (Phase I), No. 155 Optical Circuit, Weifang High tech Zone, Shandong Province
1、 Product Introduction
The road condition monitoring station adopts remote sensing technology to avoid damage to the road, thus avoiding interference with traffic caused by the installation of road weather stations.
In road conditions where embedded road sensors are inconvenient or cannot be installed, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is both safe and convenient. Low maintenance is an ideal choice for the composition of road meteorological systems.
It can be installed on existing weather stations or on other buildings with unobstructed road views.
Multispectral measurement technology enables accurate detection of the thickness of ice, snow, and standing water on road surfaces.
By providing road condition information, accurate monitoring data can be provided to road management departments to take response measures before road safety hazards occur.
2、 System composition: road condition sensor, collector, pole bracket, power supply system, cloud platform
3、 Product application
1. Remote installation of bridge deck
2. Accident prone areas
3. Areas with high traffic volume
3. Areas with frequent rain and snow
4、 Product Features
1. Remote measurement of road area for water, ice, and snow
2. Measure the road surface condition
3. Measure water accumulation, ice surface, and slippery conditions
4. Non embedded design
5. Corrosion resistance
6. Infrared detection up to 15 meters away
7. No need to close the lane, simple installation and maintenance
8. Sturdy design, all-weather measurement
5、 Technical parameters
| Monitoring distance | 2-15 meters | ||
| Detecting diameter | 23cm | ||
| angle | 30-90 degrees | ||
| power input | 220VAC、24VDC | ||
| power consumption | 5W (including lens heating) | ||
| Operating Temperature | -38 º C to+70 º C | ||
| Operating Humidity | Degree 0 to 100% | ||
| Output of road condition parameters | Thickness of accumulated water on the road surface: 0.00-10mm | Resolution: 0.01mm | Accuracy: 0.1mm |
| Road icing thickness: 0.00-10mm | |||
| Road area snow thickness: 0.00-10mm | |||
| Road surface smoothness: 0.00-1 | Resolution: 0.01 | ||
| (*) Road surface temperature: -38 º C to+60 º C | |||
| (*) Road humidity: 0-100% | |||
| (*) Environmental temperature and humidity: -40 º C to+70 º C | |||
| (*) Atmospheric pressure: 150-1100 hPa | |||
| Road condition report | Dry, damp, wet, snow, ice, mixed with ice water (* frost) | ||
| Lens contamination detection | Measurement of pollution level of optical lenses and automatic internal pollution compensation | ||
| road surface material | Concrete and asphalt pavement | ||
| communication | RS485、RS232 | ||
| barrier-free | 10 years | ||
| safety | No safety issues - Infrared remote sensing measurement technology |
||