HAWE one-way valve: individually screwed into a screw hole with a bottom hole shoulder, processed by a drill bit. The valve hole shoulder at the top corner should be sealed with an O-ring. This plug-in valve body consists of two components, with protrusions (RK type or

Pre compression connection method. There is a hemispherical valve core located between them by pre tensioning force of a spring, which is made of rolled stainless steel and hardened and polished. Similarly, its valve seat is also hardened and polished. HAWVE flow valve: HAWE flow valve can make the actual flow of the actuator change proportionally with an electrical signal (control current) within the adjustment range, involving manual remote control adjustment of the working speed, simple acceleration and deceleration, until the pre selected speed in the automatic working cycle. The control of these valves is achieved through a proportional amplifier that can maintain a constant current. For the most simple cases (such as pump on/off), it can be controlled through a potentiometer in series with the most magnetic proportional potentiometer.

HAWE pressure sensor: HAWE DT1 pressure sensor is a full bridge membrane pressure and strain gauge measuring device. Its sensitive components adopt temperature compensation, and analog circuits are used to amplify and adjust measurement signals. HAWE DT1 pressure sensor can be used in almost all industrial pressure detection fields. Typical applications include hydraulic systems, mechanical manufacturing, testing machines, equipment manufacturing, and automation engineering.

HAWE Germany's main products include:

HAWE plunger pump, HAWE proportional multi way valve, HAWE solenoid valve, HAWE two-stage oil pump, HAWE tight Pump station, HAWE explosion-proof valve, HAWE small pump station, HAWE pressure valve, HAWE directional valve, HAWE speed control valve, HAWE one-way valve, HAWE filter, HAWE pressure gauge, HAWE pressure sensor, HAWE pressure switch, HAWE hydraulic accessories, etc.