Medical mask blood synthesis penetration tester video

Introduction to the Synthetic Blood Penetration Tester for Medical Masks

The synthetic blood penetration tester for medical masks is used to measure the penetration performance of synthetic blood and other liquid sources by spraying, in order to evaluate their safety and protective performance.

Applicable standards:

GB19083-2010: Technical Requirements for Medical Protective Masks;

YY 0469-2011: Medical surgical masks;

YY/T0691-2008: Test Method for Resistance of Infectious Pathogen Protective Equipment Medical Masks to Synthetic Blood Penetration (Fixed Volume, Horizontal Spray);

ISO 22509:2004; F1862/F1862M-2013

The user manual for the synthetic blood penetration tester for medical masks includes operating procedures and safety measures. Please read this manual carefully before installing and using the instrument to ensure safety and accuracy of test results. Our company strongly recommends users to read this operation manual, and we do not assume any responsibility for the consequences caused by not strictly following these instructions to operate the medical mask synthetic blood penetration tester.

Technical Specifications

Medical mask synthetic blood penetration tester

Test environment: temperature (21 ± 5) ℃; Relative humidity (85 ± 10)%

Spray distance: (300 ± 10) mm

Nozzle diameter: Φ 0.84mm, length 12.7mm

液体喷射速度： 450cm/s; 550 cm/s; 635 cm/s

Power supply: AC220V 50Hz