What are the things to pay attention to when storing synchronous belts?
1. It is strictly prohibited to excessively bend the synchronous belt to prevent breakage and damage to the strong layer, which may result in loss of use value.
2. The synchronous belt should be kept in a normal bent state for storage.
3. Store in a cool and shady place.
4. During installation, please shorten the center distance, loosen the tension wheel, and do not forcefully pull or drag the synchronous belt from the protruding edge of the synchronous belt wheel into place.
5. The teeth of the synchronous belt pulley must be kept perpendicular to the direction of operation of the synchronous belt.
6. The parallelism between the main axes of the driving wheel and the driven wheel should be maintained at around tangent=1/1000. Inaccurate axis position has a significant impact on the service life of synchronous belts.
7. If the synchronous belt on the driving wheel is found to be offset to one side, the driven wheel should be moved in a timely manner to adjust it, and the pressure on the tensioning wheel should be adjusted to restore the parallelism between the main shafts of the driving wheel and the driven wheel.
8. When starting, the center distance changes, the synchronous belt relaxes, and there is a phenomenon of jumping teeth. It is necessary to check whether the synchronous belt pulley frame is loose and whether the shaft positioning is inaccurate. And adjust and reinforce it in a timely manner.
9. When installing synchronous belts, appropriate tension must be applied according to different synchronous belt models and bandwidths.
10. The tensioning wheel must be installed on the loose side of the driving transmission