performance

Dew point range

-Dew point at 100~+20 ° C

Dew point accuracy

± 2 ° C dew point

response time

T95 is 5 minutes (from dry to wet)

repetitiveness

Dew point at 0.5 ° C

input

output signal

4-20 mA (two-wire) active output, customizable dew point across the full range

-100 ~ + 20°C
-148 ~ +68°F
0-3000 ppmV ppmV output or non-standard output range must be specified when placing the order

power supply voltage

12–28 V DC

resistive load

Big 250 Ω @ 12V
500 ohms @ 24 V

Current consumption

20mA large

The impact of power fluctuations

±0.005% RH/V

operating condition requirements

Operating Temperature

-40 ~ +60°C

Operating Humidity

0– RH

work pressure

大 45 MPa (450 barg)

traffic

1 ~ 5 Nl/min， Installed inside the standard sampling sleeve;
0 to 10m/sec， Direct insertion type

temperature coefficient

Temperature compensation has been made within the working temperature range

mechanical properties

Sealing protection level

The corresponding standard for IP66 is BS EN 60529:1992,
And the corresponding standard NEMA 250-2003 for NEMA 4

Shell material

stainless steel

size

L=132mm x ø27mm

Mounting Thread

5/8' - 18 UNF

weight

150g

filter

HDPE protective cap
80 μ m stainless steel protective cap (optional)

electrical connection

See table

interchangeability

Sensors are interchangeable

Fault Overview
(Factory settings)