The Hengyi 200KN composite material universal testing machine adopts a double arm floor standing structure high rigidity host, and uses Panasonic servo motors and high-precision reducers to drive the grinding high-precision ball screw transmission, achieving no crawling loading. Combined with the HYtest multilingual three closed loop control system, it can achieve real-time drawing of displacement and axial force curves, and can achieve repeated cycling and low cycle fatigue performance testing.

Hengyi 200KN composite material universal testing machine testing types: tension, compression, bending, shear, peeling, tearing, cyclic fatigue, high and low temperature environment simulation, etc. Widely used for material analysis and inspection in industries such as plastics, rubber, leather, textiles, wires and cables, metals, building materials, aerospace, petrochemicals, etc. It can be tested and data processed according to various standards such as GB, ISO, JIS, ASTM, DIN, etc. It is an ideal testing equipment for the rubber and plastic industry, research institutes, universities, commercial inspection and arbitration, technical supervision and other departments.

Technical parameters of 200KN composite material universal testing machine:

1. Product specification: HY-20080

2. Accuracy level: Level 0.5

3. Load: 200KN

4. Effective force measurement range: 0.1/100-100;

5. Test force resolution, load ± 500000 yards; There is no distinction between internal and external, and the resolution remains unchanged throughout the entire process.

6. Effective test width: 600mm

7. Effective experimental space: 800mm

8. Test speed: 0.001-500mm/min (adjustable arbitrarily)

9. Speed accuracy: within ± 0.5% of the displayed value;

10. Displacement measurement accuracy: within ± 0.5% of the displayed value;

11. Deformation measurement accuracy: within ± 0.5% of the displayed value;

12. Stress controlled rate range: 0.005% to 6% FS/S

13. Stress controlled rate accuracy: When the rate is less than 0.05% FS/S, it is within ± 1% of the set value; When the rate is ≥ 0.05% FS/S, it is within ± 0.5% of the set value;

14. Strain control rate range: 0.002% to 6% FS/S

15. Strain control rate accuracy: When the rate is less than 0.05% FS/S, it is within ± 2% of the set value; When the rate is ≥ 0.05% FS/S, it is within ± 0.5% of the set value;

16. Constant force/displacement/deformation measurement range: 0.5% to 100% FS

17. Constant force/displacement/deformation measurement accuracy: When the set value is less than 10% FS, it is within ± 1% of the set value; When the set value is ≥ 10% FS, it is within ± 0.1% of the set value;

18. Test bench lifting device: fast/slow speed control, can be inched;

19. Test bench safety device: electronic limit protection

20. Test bench return: Manual can return to the initial position of the test at high speed, and automatic can return automatically after the test is completed;

21. Test automatic parking with fixed time, test automatic parking with fixed deformation, test automatic parking with fixed load

22. Overload protection: Automatic protection when the maximum load exceeds 10%;

23. Automatic diagnostic function, regularly checks the measurement system and drive system for overload, overvoltage, overcurrent, overload, etc., and immediately protects in case of abnormal situations

23. Power supply: 3000W

24. Host weight: 1250kg

25. Power supply voltage: 380V (three-phase)

26. Host size: 1000 * 680 * 230mm

27. Fixtures: One set of composite material flat stretching fixtures, one set of composite material compression fixtures, and one set of composite material three-point bending fixtures.