Composite material carbon fiber mechanical testing equipmentIt is generally recommended to use a mechanical testing machine with a rated load of 100KN, model HY-10080 host, which is mainly used to test the mechanical properties of composite carbon fibers such as tension, compression, bending, and shear according to the American standard. It can also be equipped with environmental devices such as high-temperature furnaces and low-temperature chambers to simulate material performance testing under different temperature conditions, meeting the complex testing needs of fields such as aerospace, automotive industry, and construction engineering.

Composite material carbon fiber mechanical testing equipmentCan complete the following types of experiments:

1. Tensile test: used to measure the strength, elastic modulus, yield strength and other properties of materials under tensile force.

2. Compression test: Evaluate the compressive strength, compression modulus, etc. of materials under compression.

3. Bending test: testing the bending strength, bending modulus, etc. of materials.

4. Shear test: measure the shear strength and shear modulus of materials.

5. Tear test: used to evaluate the tear resistance of materials.

6. Peel test: testing the bonding strength and peel performance of materials.

Composite material carbon fiber mechanical testing equipmentTechnical Specifications:

1. Product specification: HY-10080

2. Accuracy level: Level 0.5

3. Load: 100KN

4. Effective force measurement range: 0.1/100-100;

5. Test force resolution, load ± 500000 yards; There is no distinction between internal and external, and the resolution remains unchanged throughout the entire process.

6. Effective test width: 600mm

7. Effective experimental space: 800mm

8. Test speed: 0.001-500mm/min (adjustable arbitrarily)

9. Data sampling frequency: 2000Hz

10. Speed accuracy: within ± 0.5% of the displayed value;

11. Equipment coaxiality: 5%

12. Displacement measurement accuracy: within ± 0.5% of the displayed value;

13. Deformation measurement accuracy: within ± 0.5% of the displayed value;

14. Stress controlled rate range: 0.005% to 6% FS/S

15. Stress controlled rate accuracy: When the rate is less than 0.05% FS/S, it is within ± 1% of the set value; When the rate is ≥ 0.05% FS/S, it is within ± 0.5% of the set value;

16. Strain control rate range: 0.002% to 6% FS/S

17. Strain control rate accuracy: When the rate is less than 0.05% FS/S, it is within ± 2% of the set value; When the rate is ≥ 0.05% FS/S, it is within ± 0.5% of the set value;

18. Constant force/displacement/deformation measurement range: 0.5% to 100FS

19. Constant force/displacement/deformation measurement accuracy: When the set value is less than 10% FS, it is within ± 1% of the set value; When the set value is ≥ 10% FS, it is within ± 0.1% of the set value;

20. Test bench lifting device: fast/slow speed control, can be inched;

21. Test bench safety device: electronic limit protection

22. Test bench return: Manual can return to the initial position of the test at high speed, and automatic can return automatically after the test is completed;

23. Test automatic parking with fixed time, test automatic parking with fixed deformation, test automatic parking with fixed load

24. Overload protection: Automatic protection when the maximum load exceeds 10%;

25. Automatic diagnostic function, regularly checks the measurement system and drive system for overload, overvoltage, overcurrent, overload, etc., and immediately protects in case of abnormal situations

26. Power supply: 2000W

27. Host weight: 1250kg

28. Power supply voltage: 220V (single-phase)

29. Host size: 1000 * 680 * 2200mm