Injection molded part tensile strength testing machineTesting principle: It is a device that measures the mechanical properties of materials by applying axial and gradually increasing tensile force to standardized injection molded tensile splines (usually dumbbell shaped) until they break. It can accurately measure multiple key performance indicators of injection molding materials.

Injection molded part tensile strength testing machineMainly used to test the mechanical properties of plastic products such as tensile strength, fracture strength, yield strength, elastic modulus, and elongation. The equipment needs to support multiple testing modes (such as tension, compression, bending, etc.) and comply with international standards (such as GB, ISO, ASTM)

Injection molded part tensile strength testing machineTechnical Specifications:

1. Product specification: HY-0230

2. Accuracy level: Level 0.5

3. Load: 2000N

4. Effective force measurement range: 0.1/100-100;

5. Test force resolution, load ± 500000 yards; There is no distinction between internal and external, and the resolution remains unchanged throughout the entire process.

6. Displacement resolution: 0.0001mm

7. Deformation resolution: 0.0001mm

8. Effective test width: 120mm

9. Effective testing space: 300mm

10. Test speed: 0.001~300mm/min (adjustable arbitrarily)

11. Speed accuracy: within ± 0.5% of the displayed value;

12. Displacement measurement accuracy: within ± 0.5% of the displayed value;

13. Deformation measurement accuracy: within ± 0.5% of the displayed value;

14. Stress controlled rate range: 0.005% to 6% FS/S

15. Stress controlled rate accuracy: When the rate is less than 0.05% FS/S, it is within ± 1% of the set value; When the rate is ≥ 0.05% FS/S, it is within ± 0.5% of the set value;

16. Strain control rate range: 0.002% to 6% FS/S

17. Strain control rate accuracy: When the rate is less than 0.05% FS/S, it is within ± 2% of the set value; When the rate is ≥ 0.05% FS/S, it is within ± 0.5% of the set value;

18. Constant force/displacement/deformation measurement range: 0.5% to 100% FS

19. Constant force/displacement/deformation measurement accuracy: When the set value is less than 10% FS, it is within ± 1% of the set value; When the set value is ≥ 10% FS, it is within ± 0.1% of the set value;

20. Test bench lifting device: fast/slow speed control, can be inched;

21. Test bench safety device: electronic limit protection

22. Test bench return: Manual can return to the initial position of the test at high speed, and automatic can return automatically after the test is completed;

23. Test automatic parking with fixed time, test automatic parking with fixed deformation, test automatic parking with fixed load

24. Overload protection: Automatic protection when the maximum load exceeds 10%;

25. Automatic diagnostic function, regularly checks the measurement system and drive system for overload, overvoltage, overcurrent, overload, etc., and immediately protects in case of abnormal situations

26. Power supply: 200W

27. Host weight: 40kg

28. Power supply voltage: 220V (single-phase)

29. Host size: 430 * 315 * 855mm

30. Overall volume: 0.6 cubic meters, weight: 77KG.