simulationα. The beta surface contamination measuring instrument can be paired with simulated alpha and beta radiation sources to achieve real alpha and beta radiation detection scenarios. The measurement results are displayed on a large LCD screen. Suitable for nuclear emergency training in chemical defense, military, environmental protection, nuclear power, and other fields.

Instrument Features

Simultaneous measurementCPS and activity, one click quick switching display;

Equipped with over threshold, battery undervoltage alarm and reminder functions;

Pre set alarm threshold;

Comes with a built-in calendar clock;

The integrated design of detection and display makes the instrument easy to operate and use;

Adopting a universal approachType C charging cable;

USB data interface can meet the requirements of upgrading programs.

The appearance, operation interface, and operation mode of the simulated terminal are consistent with those of the real device;

Independent SettingsThe alpha and beta alarm thresholds are reached, and when the alarm threshold is reached, the simulated surface pollution detector will sound and emit light alarms; Conduct surface pollution detection and decontamination training;

equipα. Two types of simulated radiation sources, β, can be formulated as powder or liquid;

The radiation value of the simulated radiation source can be detected by the simulated surface nuclear contamination detectorSimulated radiation sources can be disinfected using real decontamination equipment, and the radiation value is measured based on the actual decontamination situation;

Display in numerical formThe contamination concentration of alpha and beta channels ranges from 0-4000 Bq/cm ² with an accuracy of 0.5 Bq/cm ²; Table detection training can monitor real-time alpha contamination concentration (Bq/cm2) and beta contamination concentration (Bq/cm).